The series connection of IGBTs investigated by experiments and simulation

PESC Record. 27th Annual IEEE Power Electronics Specialists Conference Pub Date : 1996-06-23 DOI:10.1109/PESC.1996.548819

J. Sigg, M. Bruckmann, P. Turkes

引用次数: 27

Abstract

Both, experimental and simulation techniques are used to investigate the series connection of IGBTs. An experimental setup with a power rating of 4.8 kV and 600 A is established. Circuit simulations are performed using physics-based models for the IGBT and the freewheeling diode. Experimental and calculated characteristics agree very well.

查看原文本刊更多论文

通过实验和仿真研究了igbt的串联连接

实验和仿真技术都被用于研究igbt的串联连接。建立了额定功率为4.8 kV、600a的实验装置。使用基于物理的模型对IGBT和自由转二极管进行了电路仿真。实验结果与计算结果吻合较好。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

PESC Record. 27th Annual IEEE Power Electronics Specialists Conference

自引率

0.00%

发文量