From Single Nanowires to Smart Systems: Different Ways to Assess Food Quality

Abstract

Recently, low-dimensional (1D, 2D) nanostructured materials have been attracting more and more interest as building blocks for innovative systems. Metal oxide nanowires are one of the most widely used materials for solid-state gas sensors, as they are simple to make, inexpensive, and sensitive to a wide range of gases and volatiles. Unfortunately, their broad sensitivity has a price to pay, which is very low selectivity. Fortunately, this flaw is not a problem for all applications. Where the boundary conditions are defined and “simple” (only the presence of a target gas is expected, without any interfering gases), a single traditional chemiresistor may be the best choice, while in cases where the variables are many, it is better to use an intelligent system. In this paper, we will show a resistive sensor based on a single SnO2 nanowire which, working at three temperatures (200, 250, and 300 °C), is able to detect tens of ppb of ammonia (30 ppb at 300 °C). The limit of detection (LoD) was calculated as 3 N/S, where N is the standard deviation of the sensor signal in air and S is the sensor sensitivity. We will show that the performance of this nanosensor is excellent and can be used in various applications, including agri-food quality monitoring. We will demonstrate that the SnO2 nanowire in a thermal gradient can act as a nano-electronic nose thanks to machine learning algorithms. The single nanowire-based sensor can estimate the total viable count with an error of 2.32% on mackerel fish samples stored at room temperature (25 °C) and in a fridge (4 °C). The integration of such a small (less than one square mm) and cheap device into the food supply chain would greatly reduce waste and the frequency of food poisoning.