Investigation of cutting time and tool wear rate on EN-24 steel alloy by the drilling process

IF 0.7 Q3 ENGINEERING, MULTIDISCIPLINARY

Engineering Review Pub Date : 2022-01-01 DOI:10.30765/er.1611

Yogesh Jangid, A. Goyal, M. Dadhich

引用次数: 0

Abstract

Modeling and optimization of cutting parameters are one of the most important factors in manufacturing process. The aim of present work is to establish the relation among input factors i.e. spindle speed, feed rate and depth of cut and response parameters i.e. cutting time and tool wear rate. The operation is performed on EN-24 alloy steel material. The analysis of variance (ANOVA) has been performed to find the significant and non-significant parameters. Mathematical model is developed for CT and TWR and optimized using composite desirability (CD) function technique. It was found that the best machining factor is depth of cut whereas spindle speed is the less significant machining parameter. The confirmation experiments have been also performed to validate the results. The given model could be utilized to select the level of drilling parameters.

查看原文本刊更多论文

钻削加工EN-24钢合金切削时间和刀具磨损率的研究

切削参数的建模和优化是制造过程中最重要的因素之一。本文的目的是建立输入因素(主轴转速、进给速度和切削深度)与响应参数(切削时间和刀具磨损率)之间的关系。该操作在EN-24合金钢材料上进行。进行了方差分析(ANOVA)以找到显著和非显著参数。建立了CT和TWR的数学模型，并利用复合期望函数技术对其进行了优化。结果表明，切削深度是最佳的加工参数，而主轴转速是影响较小的加工参数。并进行了实验验证。该模型可用于钻井参数水平的选择。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Engineering Review ENGINEERING, MULTIDISCIPLINARY-

CiteScore

1.00

自引率

0.00%

发文量

期刊介绍： Engineering Review is an international journal designed to foster the exchange of ideas and transfer of knowledge between scientists and engineers involved in various engineering sciences that deal with investigations related to design, materials, technology, maintenance and manufacturing processes. It is not limited to the specific details of science and engineering but is instead devoted to a very wide range of subfields in the engineering sciences. It provides an appropriate resort for publishing the papers covering prior applications – based on the research topics comprising the entire engineering spectrum. Topics of particular interest thus include: mechanical engineering, naval architecture and marine engineering, fundamental engineering sciences, electrical engineering, computer sciences and civil engineering. Manuscripts addressing other issues may also be considered if they relate to engineering oriented subjects. The contributions, which may be analytical, numerical or experimental, should be of significance to the progress of mentioned topics. Papers that are merely illustrations of established principles or procedures generally will not be accepted. Occasionally, the magazine is ready to publish high-quality-selected papers from the conference after being renovated, expanded and written in accordance with the rules of the magazine. The high standard of excellence for any of published papers will be ensured by peer-review procedure. The journal takes into consideration only original scientific papers.