A sector in-plane finite element for analysis of multi-layer cylinders exposed to pressure and thermal loading

IF 0.7 Q3 ENGINEERING, MULTIDISCIPLINARY

Engineering Review Pub Date : 2022-01-01 DOI:10.30765/er.1698

Asma Bouzeriba, C. Bouzrira

引用次数: 0

Abstract

In this paper, analysis of multi-layer cylinders exposed to pressure and thermal loading is considered using a sector element based on the strain approach. Materials in cylinder layers have been assumed to be linearly elastic, homogeneous, and isotropic. The sector in-plane finite element employed is defined in the polar coordinate system with three degrees of freedom at each corner node (the two translations and the in-plane rotation). The results of displacement and stresses obtained in the present paper are compared with the analytical solutions, and a good accuracy shown.

查看原文本刊更多论文

基于扇形面内有限元的多层圆柱体压力和热载荷分析

本文采用基于应变法的扇形单元对受压力和热载荷作用的多层圆柱体进行了分析。圆柱体层中的材料被假定为线性弹性、均匀性和各向同性。所采用的扇形面内有限元在极坐标系中定义，每个角节点(两次平移和面内旋转)有三个自由度。本文得到的位移和应力计算结果与解析解进行了比较，表明了较好的精度。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Engineering Review ENGINEERING, MULTIDISCIPLINARY-

CiteScore

1.00

自引率

0.00%

发文量

期刊介绍： Engineering Review is an international journal designed to foster the exchange of ideas and transfer of knowledge between scientists and engineers involved in various engineering sciences that deal with investigations related to design, materials, technology, maintenance and manufacturing processes. It is not limited to the specific details of science and engineering but is instead devoted to a very wide range of subfields in the engineering sciences. It provides an appropriate resort for publishing the papers covering prior applications – based on the research topics comprising the entire engineering spectrum. Topics of particular interest thus include: mechanical engineering, naval architecture and marine engineering, fundamental engineering sciences, electrical engineering, computer sciences and civil engineering. Manuscripts addressing other issues may also be considered if they relate to engineering oriented subjects. The contributions, which may be analytical, numerical or experimental, should be of significance to the progress of mentioned topics. Papers that are merely illustrations of established principles or procedures generally will not be accepted. Occasionally, the magazine is ready to publish high-quality-selected papers from the conference after being renovated, expanded and written in accordance with the rules of the magazine. The high standard of excellence for any of published papers will be ensured by peer-review procedure. The journal takes into consideration only original scientific papers.