Mechanical properties of biomass-derived silica nanoparticles reinforced PMMA composite material

IF 1.4 4区材料科学 Q3 MATERIALS SCIENCE, CERAMICS

Science of Sintering Pub Date : 2022-01-01 DOI:10.2298/sos2202211v

M. Vuksanović, I. Mladenović, N. Tomić, M. Petrović, V. Radojević, A. Marinković, R. Jančić-Heinemann

引用次数: 3

Abstract

Rice husk was used to produce silica particles, which were then used to reinforce the polymer matrix. The synthesized SiO2 particles were characterized using X-ray diffraction, Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy with EDS. In a PMMA matrix, prepared SiO2 particles in amounts of 1, 3, and 5 wt.% were used as reinforcing agents. The goal of this research was to see if SiO2 particles had any effect on the mechanical properties of polymer composite materials. The morphology of the composites was examined using a field emission scanning electron microscope (FE-SEM). Vickers microindentation hardness and impact testing were used to determine the mechanical properties of the obtained composites. The indentation creep?s behavior of a polymethylmetacrylate (PMMA) composite material with varying amounts of nanoparticles (SiO2) was investigated and analyzed.

查看原文本刊更多论文

生物质源二氧化硅纳米颗粒增强PMMA复合材料的力学性能

稻壳被用来制造二氧化硅颗粒，然后用来增强聚合物基体。利用x射线衍射、傅里叶变换红外光谱(FTIR)和扫描电镜能谱仪(EDS)对合成的SiO2颗粒进行了表征。在PMMA基体中，分别以1、3、5 wt.%的SiO2颗粒作为补强剂。本研究的目的是观察SiO2颗粒是否对高分子复合材料的机械性能有任何影响。利用场发射扫描电镜(FE-SEM)观察复合材料的形貌。采用维氏微压痕硬度和冲击试验来测定复合材料的力学性能。压痕蠕变?研究了不同含量的纳米颗粒(SiO2)对聚甲基丙烯酸甲酯(PMMA)复合材料性能的影响。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Science of Sintering 工程技术-材料科学：硅酸盐

CiteScore

2.50

自引率

46.70%

发文量

审稿时长

3.3 months

期刊介绍： Science of Sintering is a unique journal in the field of science and technology of sintering. Science of Sintering publishes papers on all aspects of theoretical and experimental studies, which can contribute to the better understanding of the behavior of powders and similar materials during consolidation processes. Emphasis is laid on those aspects of the science of materials that are concerned with the thermodynamics, kinetics and mechanism of sintering and related processes. In accordance with the significance of disperse materials for the sintering technology, papers dealing with the question of ultradisperse powders, tribochemical activation and catalysis are also published. Science of Sintering journal is published four times a year. Types of contribution: Original research papers, Review articles, Letters to Editor, Book reviews.