Studies on thermophysical property variations of graphene nanoparticle suspended ethylene glycol/water

IF 1 4区 工程技术 Q4 CHEMISTRY, APPLIED
M. P. Srinivasan, R. Baskar
{"title":"Studies on thermophysical property variations of graphene nanoparticle suspended ethylene glycol/water","authors":"M. P. Srinivasan, R. Baskar","doi":"10.2298/ciceq200504036p","DOIUrl":null,"url":null,"abstract":"The objective of the study is to determine the thermophysical property variations (such as viscosity, density, specific heat capacity and thermal conductivity) of graphene suspended base fluid (ethylene glycol (EG)/water (W)), with respect to graphene nanoparticle concentration and hot fluid inlet temperature. Graphene nanoparticle concentrations (0.2, 0.4, 0.6, 0.8 and 1 vol.%) and the base fluid of 30:70 vol.% of EG: Water is prepared initially. The impact of graphene nanoparticle addition on base fluids based on experimentation in the commercial plate heat exchanger was studied. In this experiment, the hot fluid inlet temperature was varied at 55, 65 and 75 ?C. The experimental results of thermophysical properties were compared with the selected models proposed in the literature. Einstein (1956), Kitano (1981) and Bachelor models (1977) have been used to consider the effect of viscosity. The measured density and specific heat capacity were validated with Pak and Cho and Xuan models, respectively. To consider the effect of thermal conductivity, three different models (Maxwell (1954), Vajjah (2010) and Sahoo (2012)) have been used. Study revealed that the thermophysical properties of base fluid significantly affect the graphene nanoparticle suspension.","PeriodicalId":9716,"journal":{"name":"Chemical Industry & Chemical Engineering Quarterly","volume":"1 1","pages":""},"PeriodicalIF":1.0000,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Chemical Industry & Chemical Engineering Quarterly","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.2298/ciceq200504036p","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"CHEMISTRY, APPLIED","Score":null,"Total":0}
引用次数: 1

Abstract

The objective of the study is to determine the thermophysical property variations (such as viscosity, density, specific heat capacity and thermal conductivity) of graphene suspended base fluid (ethylene glycol (EG)/water (W)), with respect to graphene nanoparticle concentration and hot fluid inlet temperature. Graphene nanoparticle concentrations (0.2, 0.4, 0.6, 0.8 and 1 vol.%) and the base fluid of 30:70 vol.% of EG: Water is prepared initially. The impact of graphene nanoparticle addition on base fluids based on experimentation in the commercial plate heat exchanger was studied. In this experiment, the hot fluid inlet temperature was varied at 55, 65 and 75 ?C. The experimental results of thermophysical properties were compared with the selected models proposed in the literature. Einstein (1956), Kitano (1981) and Bachelor models (1977) have been used to consider the effect of viscosity. The measured density and specific heat capacity were validated with Pak and Cho and Xuan models, respectively. To consider the effect of thermal conductivity, three different models (Maxwell (1954), Vajjah (2010) and Sahoo (2012)) have been used. Study revealed that the thermophysical properties of base fluid significantly affect the graphene nanoparticle suspension.
纳米石墨烯悬浮乙二醇/水的热物性变化研究
本研究的目的是确定石墨烯悬浮基液(乙二醇(EG)/水(W))在石墨烯纳米颗粒浓度和热流体入口温度方面的热物理性质变化(如粘度、密度、比热容和导热系数)。初始制备石墨烯纳米颗粒浓度(0.2、0.4、0.6、0.8和1 vol.%)和30:70 vol.% EG: Water的基础液。在工业板式换热器实验的基础上,研究了纳米石墨烯对基液的影响。实验中,热流体入口温度分别为55℃、65℃和75℃。将热物理性质的实验结果与文献中提出的模型进行了比较。Einstein(1956)、Kitano(1981)和Bachelor(1977)模型被用来考虑粘度的影响。测定的密度和比热容分别用Pak、Cho和Xuan模型进行验证。为了考虑热导率的影响,使用了三种不同的模型(Maxwell (1954), Vajjah(2010)和Sahoo(2012))。研究表明,基液的热物理性质对石墨烯纳米颗粒悬浮液有显著影响。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Chemical Industry & Chemical Engineering Quarterly
Chemical Industry & Chemical Engineering Quarterly CHEMISTRY, APPLIED-ENGINEERING, CHEMICAL
CiteScore
2.10
自引率
0.00%
发文量
24
审稿时长
3.3 months
期刊介绍: The Journal invites contributions to the following two main areas: • Applied Chemistry dealing with the application of basic chemical sciences to industry • Chemical Engineering dealing with the chemical and biochemical conversion of raw materials into different products as well as the design and operation of plants and equipment. The Journal welcomes contributions focused on: Chemical and Biochemical Engineering [...] Process Systems Engineering[...] Environmental Chemical and Process Engineering[...] Materials Synthesis and Processing[...] Food and Bioproducts Processing[...] Process Technology[...]
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信