Improving phosphorus removal of conventional septic tanks by a recirculating steel slag filter

Abstract

The objective of this project was to increase the phosphorus (P) retention capacity of a conventional septic tank by adding a recirculating slag filter. Two recirculation modes and recirculation ratios from 5 to 50% were tested in the laboratory with reconstituted domestic wastewater. The best system was recirculation from the end to the inlet of the second compartment of a septic tank with a 50% recirculation ratio in the slag filter, achieving 4.2 and 1.9 mg P/L at the effluent for total phosphorus (TP) and orthophosphate (o-PO4), respectively, and a pH of 8.8. The calculated size of the slag filter for a two-bedroom house application was 1,875 kg for an expected lifetime of 2 years. The 1 mg P/L level goal was not reached, but P precipitation may be favoured by the relatively high effluent pH reaching the infiltration bed.