Novel Guided Head Expander Design Uses Close Coupled Inertial Masses and Hydrostatic Bearings to Minimize Cross-Axis Motion

Abstract

When vertical vibration testing of large test articles is required, it is common to install a head expander on the armature of a shaker. Larger test articles often have a center of gravity relatively far above the mounting surface. When combined with the armature and head expander, these test articles may exhibit multiple structural resonances within the desired test band that do not exist in the intended application. These test configuration-driven characteristics are likely to create unwanted cross-axis excitation during a vibration test.The difficulty in controlling unwanted cross-axis motion usually increases when testing large items. Excessive cross-axis motion can "over-test" the test item, creating the risk of damaging the test item, or can limit the input in the test axis, thus jeopardizing a successful test.Orbital Sciences commissioned the design of a guided head expander system that greatly reduces the cross-axis motion at the test article mounting surface of the head expander. The design submi...