Study of the rate of generation of waste from construction in new works in the city of Ribeirao Preto-SP

Q3 Engineering

Gestao e Producao Pub Date : 2020-01-01 DOI:10.1590/0104-530x5236-20

Luiz Paulo da Silva, José da Costa Marques Neto

引用次数: 0

Abstract

Abstract: In the construction industry, many waste products are produced most part of the time, because they do not have a correct end, end up causing strong impacts on the environment. To this end, CONAMA Resolution No. 307/2002 and its amendments thereafter determine the guidelines for the management of civil construction waste appropriately. In this context, this article aims, through a quantitative study, to identify the situation of civil construction waste, called here as RCD, in the city of Ribeirao Preto, determining the amount of waste generated through two parameters; licensed areas and volume disposed of at authorized locations, from a generation rate of 183.28 kg/m2, generating 1,112.35 t/day and 561.98 t/day respectively. The work sought to relate the values and obtained a per person generation of 1.24 kg/inhab × day. Thus, the article identified and measured the generation of construction waste in the city of Ribeirao Preto-SP, providing subsidies and information for comparisons with existing bibliography.

查看原文本刊更多论文

里贝罗·普雷托- sp市新工程施工产生废物率的研究

摘要:在建筑行业中，很多废弃物大部分时间都是产生的，因为它们没有一个正确的归宿，最终对环境造成强烈的影响。为此，CONAMA第307/2002号决议及其随后的修正案确定了适当管理民用建筑废物的准则。在此背景下，本文旨在通过定量研究，确定里贝拉奥普雷图市民用建筑垃圾(这里称为RCD)的情况，通过两个参数确定垃圾产生量;在授权地点处置的许可面积及排放量，由每平方米183.28公斤的生成率，分别为每日1,112.35公吨及561.98公吨。这项工作试图将这些值联系起来，并获得了每人每天1.24千克的排放量。因此，本文确定并测量了ribeiao Preto-SP城市建筑垃圾的产生，为与现有文献的比较提供补贴和信息。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Gestao e Producao Engineering-Industrial and Manufacturing Engineering

CiteScore

1.60

自引率

0.00%

发文量

审稿时长

44 weeks

期刊介绍： Gestão & Produção is a journal published four times a year year (March, June, September and December) by the Departamento de Engenharia de Produção (DEP) of Universidade Federal de São Carlos (UFSCar). The first issue of Gestão & Produção was published in April, 1994. Actually, G&P was result of experience of professors of DEP/UFSCar in editing, in the beginning, "Cadernos DEP" in the 1980s, followed by "Cadernos de Engenharia de Produção". The last three issues of "Cadernos de Engenharia de Produção" were a test previous to the launch of Gestão & Produção because most of the journal characteristics were already established, like regularity.