DESIGN OF LIQUID-STORAGE TANK: RESULTS OF SOFTWARE MODELING VS CALCULATIONS ACCORDING TO EUROCODE

IF 0.6 Q4 ENGINEERING, CIVIL

Electronic Journal of the Faculty of Civil Engineering Osijek-e-GFOS Pub Date : 2017-12-23 DOI:10.13167/2017.15.8

M. Gulin, I. Uzelac, J. Dolejs, I. Boko

引用次数: 2

Abstract

The objective of this article is to show the design process of a liquid-storage tank shell according to Eurocode and compare the results obtained using the norms with those from a finite element method (FEM) analysis. The calculations were performed for an aboveground vertical steel water-storage tank with a variable thickness wall and stiffening ring on top. First, the types of liquid storage tanks are briefly explained. Second, the given tank is described. Third, an analysis of the tank wall according to the Eurocode was carried out. The FEM analysis was performed using the Scia Engineer ver. 17 software. Finally, all the results are presented in tables and compared.

查看原文本刊更多论文

储液罐的设计:软件建模与欧洲规范计算的结果

本文的目的是展示按照欧洲规范设计储液罐壳体的过程，并将其与有限元分析结果进行比较。计算对象为具有变厚壁和顶部加筋环的地上立式钢储水箱。首先，简要说明液体储罐的类型。其次，对给定的储罐进行描述。第三，根据欧洲规范对罐壁进行了分析。有限元分析采用Scia Engineer软件进行。17个软件。最后，将所有结果以表格形式呈现并进行比较。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Electronic Journal of the Faculty of Civil Engineering Osijek-e-GFOS ENGINEERING, CIVIL-

自引率

0.00%

发文量

审稿时长

24 weeks