High-pressure and high-temperature synthesis of rhenium carbide using rhenium and nanoscale amorphous two-dimensional carbon nitride1

Abstract

Abstract Both Re2C and Re2N are ultra incompressible and have a bulk modulus of about 400 GPa. These materials are synthesized under high pressure and high temperature. The synthesis pressures are about 10 GPa or below for Re2C and 20–30 GPa for Re2N. If the synthesis pressure of Re2N was about 10 GPa or below, a large volume high-pressure cell like a multi-anvil apparatus can be used to synthesize Re2N. To realize this, a proper solid nitrogen source is needed instead of liquid or gas nitrogen. We used a precursor of a mixture of rhenium and home-made nanoscale amorphous two-dimensional carbon nitride as a solid nitrogen source. Consequently, the synthesis reaction produced Re2C but not Re2N. We characterized the synthesized Re2C by various techniques including high-pressure x-ray diffraction (XRD). The bulk modulus B0 of the synthesized Re2C under hydrostatic conditions was estimated to be 385.7 ± 18.0 GPa. This value is a little smaller than the previous data. When the pressure medium became non-hydrostatic, the peculiar compression behaviour occurred; the rate of broadening of XRD lines increased and the compression became negligible in the range of a few GPa. The reason for this peculiar behaviour is not known.