The Electrochemical Behaviour of AISI 304 Stainless Steel Following Surface Modification by Ion Implantation

IF 1.2 4区材料科学 Q4 ELECTROCHEMISTRY

Transactions of The Institute of Metal Finishing Pub Date : 1998-01-01 DOI:10.1080/00202967.1998.11871208

A. Hannani, E. Kermiche

引用次数: 6

Abstract

An austenitic stainless steel (AISI 304) has been surface implanted with nitrogen at room temperature. Ion implantation is an effective surface modification to improve the corrosion performance of metal materials. Using Electrochemical Impedance Spectroscopy (EIS), the electrochemical parameters which characterised the stability of passive films were calculated from the simple data of the response curves. The experimental results indicated that the stability of passive films and the pitting resistance of AISI 304 stainless steel are improved by nitrogen ion implantation.

查看原文本刊更多论文

离子注入表面改性后AISI 304不锈钢的电化学行为

在室温下对奥氏体不锈钢(AISI 304)表面注入氮气。离子注入是提高金属材料腐蚀性能的有效表面改性方法。利用电化学阻抗谱(EIS)从响应曲线的简单数据计算表征钝化膜稳定性的电化学参数。实验结果表明，氮离子注入提高了AISI 304不锈钢钝化膜的稳定性和抗点蚀性能。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Transactions of The Institute of Metal Finishing 工程技术-材料科学：膜

CiteScore

3.40

自引率

10.50%

发文量

审稿时长

3 months

期刊介绍： Transactions of the Institute of Metal Finishing provides international peer-reviewed coverage of all aspects of surface finishing and surface engineering, from fundamental research to in-service applications. The coverage is principally concerned with the application of surface engineering and coating technologies to enhance the properties of engineering components and assemblies. These techniques include electroplating and electroless plating and their pre- and post-treatments, thus embracing all cleaning pickling and chemical conversion processes, and also complementary processes such as anodising. Increasingly, other processes are becoming important particularly regarding surface profile, texture, opacity, contact integrity, etc.