Effect of concentration, aging, and annealing on sol gel ZnO and Al-doped ZnO thin films

IF 3.4 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY
D. T. Speaks
{"title":"Effect of concentration, aging, and annealing on sol gel ZnO and Al-doped ZnO thin films","authors":"D. T. Speaks","doi":"10.1186/s40712-019-0113-6","DOIUrl":null,"url":null,"abstract":"<p>Presented are experimental results on the effect of concentration, aging, and annealing time on the optical and structural properties of sol gel zinc oxide (ZnO) and Al-doped ZnO thin films. ZnO and ZnO:Al thin films were fabricated on glass substrates using spin coating followed by annealing. XRD confirmed that the films are polycrystalline wurtzite. For low concentration films (0.2 and 0.4 M), grain size increased with aging time up to 72 hours. For high concentration samples (0.6 and 0.8 M), grain size increased only up to 48 hours. Additional aging resulted in a decrease in the grain size. The largest grain sizes were found for 0.4 M at 72 hours and 0.6 M at 48 hours. The band gap tended to decrease with increasing aging time for all concentrations. The smallest band gap for each aging time (24, 48, and 72 hours) was observed for 0.6 M films. These results suggest that higher concentration sol gel near 0.6 M may yield better properties with shorter aging times than 0.2 and 0.4 M films. Annealing data suggests that 350 <sup>o</sup>C is the minimum annealing at 1 hour to achieve high-quality films and higher concentration ZnO films have stronger diffraction peaks. ZnO:Al also exhibits stronger diffraction peaks and a larger blue shift of the band edge with increasing sol gel concentration.</p>","PeriodicalId":592,"journal":{"name":"International Journal of Mechanical and Materials Engineering","volume":"15 1","pages":""},"PeriodicalIF":3.4000,"publicationDate":"2020-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1186/s40712-019-0113-6","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Mechanical and Materials Engineering","FirstCategoryId":"1085","ListUrlMain":"https://link.springer.com/article/10.1186/s40712-019-0113-6","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 2

Abstract

Presented are experimental results on the effect of concentration, aging, and annealing time on the optical and structural properties of sol gel zinc oxide (ZnO) and Al-doped ZnO thin films. ZnO and ZnO:Al thin films were fabricated on glass substrates using spin coating followed by annealing. XRD confirmed that the films are polycrystalline wurtzite. For low concentration films (0.2 and 0.4 M), grain size increased with aging time up to 72 hours. For high concentration samples (0.6 and 0.8 M), grain size increased only up to 48 hours. Additional aging resulted in a decrease in the grain size. The largest grain sizes were found for 0.4 M at 72 hours and 0.6 M at 48 hours. The band gap tended to decrease with increasing aging time for all concentrations. The smallest band gap for each aging time (24, 48, and 72 hours) was observed for 0.6 M films. These results suggest that higher concentration sol gel near 0.6 M may yield better properties with shorter aging times than 0.2 and 0.4 M films. Annealing data suggests that 350 oC is the minimum annealing at 1 hour to achieve high-quality films and higher concentration ZnO films have stronger diffraction peaks. ZnO:Al also exhibits stronger diffraction peaks and a larger blue shift of the band edge with increasing sol gel concentration.

Abstract Image

浓度、时效和退火对溶胶凝胶ZnO和al掺杂ZnO薄膜的影响
给出了浓度、时效和退火时间对溶胶凝胶氧化锌(ZnO)和掺铝氧化锌薄膜光学和结构性能影响的实验结果。采用自旋镀膜和退火法制备了ZnO和ZnO:Al薄膜。XRD证实薄膜为多晶纤锌矿。对于低浓度(0.2和0.4 M)薄膜,随着时效时间的延长,晶粒尺寸逐渐增大。对于高浓度样品(0.6和0.8 M),晶粒尺寸仅增加到48小时。进一步时效导致晶粒尺寸减小。72 h和48 h的最大晶粒尺寸分别为0.4 M和0.6 M。各浓度的带隙随时效时间的增加而减小。在不同时效时间下(24、48和72小时),0.6 M薄膜的带隙最小。这些结果表明,浓度较高的溶胶凝胶在0.6 M附近比0.2和0.4 M膜具有更好的性能和更短的老化时间。退火数据表明,要获得高质量的薄膜,最低退火温度为350℃,退火时间为1小时,较高浓度的ZnO薄膜具有较强的衍射峰。随着溶胶凝胶浓度的增加,ZnO:Al也表现出更强的衍射峰和更大的带边蓝移。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
CiteScore
8.60
自引率
0.00%
发文量
1
审稿时长
13 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信