WATER RETENTION OF BEECH SHAVINGS HEAT-TREATED AT LOWER TEMPERATURES

Abstract

Water retention after 2 hours and 24 hours of soaking in water was determined for beech shavings subjected to heat treatment at temperatures of 120°C, 140°C and 160°C for 2 hours, 4 hours, 6 hours and 8 hours in order to reduce the equilibrium moisture content (EMC) of the wood shavings for use in wood based composites. EMC was determined after 14 days of air conditioning at 23°C and 55% relative humidity. The measured values were compared with the sample dried at 103°C. Water retention was determined after 15 min of centrifugation at 1400 rev.min-1 for a more objective assessment of the wood's ability to retain water in the cell lumens. The results showed that heat treatment reduces the EMC of beech shavings heat-treated at 160°C for 8 hours in the given conditions from 8.7% to 6.19%. The reduction of EMC at lower temperature was not sufficient enough, especially in the shorter treatment duration of up to 6 hours. In parallel, the reduction of water retention from 65.53% to 47.79% was caused by heat treatment for 8 hours at 160°C.