Analysing the Impact of Cutting Force and Vibration on Surface Roughness in External Cylindrical Grinding of SKH2 Stell

Q2 Engineering

Journal of Machine Engineering Pub Date : 2023-06-14 DOI:10.36897/jme/168240

Long Hoang, L. T. Nguyen

引用次数: 0

Abstract

The surface roughness of a part during external cylindrical grinding is directly impacted by cutting force and vibration, which are intermediate parameters. To improve the quality of finished parts, studying and controlling these parameters is essential. In this research, the Taguchi method combined with ANOVA analysis was utilized to analyse the effects of feed rate, cutting depth, and rotational speeds on cutting force and vibration amplitude. The test material used was SKH2 steel, which was heat-treated to a hardness of 60 HRC. The research aimed to investigate the relationship between cutting force, vibration, and surface roughness. The study concludes with an analysis of the influence of cutting force and vibration on the surface roughness of parts during external cylindrical grinding. The results show that as cutting force and vibration increase, the surface roughness of the workpiece in external grinding will also increase, and conversely when cutting force and vibration decrease, the surface roughness will decrease

查看原文本刊更多论文

SKH2钨铬钴合金外圆磨削中切削力和振动对表面粗糙度的影响分析

外圆磨削过程中零件的表面粗糙度直接受到切削力和振动这两个中间参数的影响。为了提高成品零件的质量，研究和控制这些参数是必不可少的。本研究采用田口法和方差分析相结合的方法，分析了进给速度、切削深度和转速对切削力和振幅的影响。所使用的测试材料是SKH2钢，其被热处理至60HRC的硬度。本研究旨在研究切削力、振动和表面粗糙度之间的关系。最后分析了外圆磨削过程中切削力和振动对零件表面粗糙度的影响。结果表明，随着切削力和振动的增加，外圆磨削中工件的表面粗糙度也会增加，反之，当切削力和震动减小时，表面粗糙度会减小

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Machine Engineering Engineering-Industrial and Manufacturing Engineering

CiteScore

2.70

自引率

0.00%

发文量

审稿时长

25 weeks

期刊介绍： ournal of Machine Engineering is a scientific journal devoted to current issues of design and manufacturing - aided by innovative computer techniques and state-of-the-art computer systems - of products which meet the demands of the current global market. It favours solutions harmonizing with the up-to-date manufacturing strategies, the quality requirements and the needs of design, planning, scheduling and production process management. The Journal'' s subject matter also covers the design and operation of high efficient, precision, process machines. The Journal is a continuator of Machine Engineering Publisher for five years. The Journal appears quarterly, with a circulation of 100 copies, with each issue devoted entirely to a different topic. The papers are carefully selected and reviewed by distinguished world famous scientists and practitioners. The authors of the publications are eminent specialists from all over the world and Poland. Journal of Machine Engineering provides the best assistance to factories and universities. It enables factories to solve their difficult problems and manufacture good products at a low cost and fast rate. It enables educators to update their teaching and scientists to deepen their knowledge and pursue their research in the right direction.