Characteristic Analysis of Solar Panels on Clay and Ceramic Roof Tiles

Q2 Agricultural and Biological Sciences

International Review of Mechanical Engineering Pub Date : 2022-03-31 DOI:10.15866/ireme.v16i3.20004

Firman Firman, Nur Hamzah Said, M. Djalal

{"title":"Characteristic Analysis of Solar Panels on Clay and Ceramic Roof Tiles","authors":"Firman Firman, Nur Hamzah Said, M. Djalal","doi":"10.15866/ireme.v16i3.20004","DOIUrl":null,"url":null,"abstract":". In general, the PLTS Rooftop installation only considers the power capacity to be installed and the available roof area. It does not consider the type of roof material where it is installed. Meanwhile, the roof of the house has the absorption of sunlight and different thermal properties depending on the type of roofing material. In this study, the objective of this research is to observe the temperature characteristics between solar panels and roofs from 2 types of materials, namely clay tile and ceramic tile, in which the influence of the height between the solar panel and the ceiling on the temperature and its effect on the efficiency of the solar panel. Based on the results of this study, the temperature characteristics between the solar panel and the roof (T3) of various types of material have an influence on the efficiency value of the solar panel, where the maximum efficiency value is obtained for clay tile material at a temperature (T3) of 33.77 ⁰ C of 4.22% and ceramic tile at temperature (T3) at 5.69%. ę dzy panelami s ł onecznymi a dachami z 2 rodzajów materia ł ów tj. dachówka ceramiczna i dachówka ceramiczna, w których wp ł yw wysoko ś ci pomi ę dzy panelem s ł onecznym a sufitem na temperatur ę i jego wp ł yw na wydajno ść panelu s ł onecznego. Na podstawie wyników tych bada ń na warto ść sprawno ś ci panelu s ł onecznego wp ł ywa charakterystyka temperaturowa pomi ę dzy panelem s ł onecznym a dachem (T3) z ró ż nych materia ł ów, gdzie maksymaln ą warto ść sprawno ś ci uzyskuje si ę dla materia ł u z dachówki ceramicznej przy temperatura (T3) 33,77 ⁰ C 4,22% i p ł ytka ceramiczna w temperaturze (T3) 33,51 ⁰ C 5,69%. ( Analiza charakterystyki paneli słonecznych na dachówkach ceramicznych i ceramicznych)","PeriodicalId":39251,"journal":{"name":"International Review of Mechanical Engineering","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-03-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"5","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Review of Mechanical Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.15866/ireme.v16i3.20004","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Agricultural and Biological Sciences","Score":null,"Total":0}

引用次数: 5

Abstract

. In general, the PLTS Rooftop installation only considers the power capacity to be installed and the available roof area. It does not consider the type of roof material where it is installed. Meanwhile, the roof of the house has the absorption of sunlight and different thermal properties depending on the type of roofing material. In this study, the objective of this research is to observe the temperature characteristics between solar panels and roofs from 2 types of materials, namely clay tile and ceramic tile, in which the influence of the height between the solar panel and the ceiling on the temperature and its effect on the efficiency of the solar panel. Based on the results of this study, the temperature characteristics between the solar panel and the roof (T3) of various types of material have an influence on the efficiency value of the solar panel, where the maximum efficiency value is obtained for clay tile material at a temperature (T3) of 33.77 ⁰ C of 4.22% and ceramic tile at temperature (T3) at 5.69%. ę dzy panelami s ł onecznymi a dachami z 2 rodzajów materia ł ów tj. dachówka ceramiczna i dachówka ceramiczna, w których wp ł yw wysoko ś ci pomi ę dzy panelem s ł onecznym a sufitem na temperatur ę i jego wp ł yw na wydajno ść panelu s ł onecznego. Na podstawie wyników tych bada ń na warto ść sprawno ś ci panelu s ł onecznego wp ł ywa charakterystyka temperaturowa pomi ę dzy panelem s ł onecznym a dachem (T3) z ró ż nych materia ł ów, gdzie maksymaln ą warto ść sprawno ś ci uzyskuje si ę dla materia ł u z dachówki ceramicznej przy temperatura (T3) 33,77 ⁰ C 4,22% i p ł ytka ceramiczna w temperaturze (T3) 33,51 ⁰ C 5,69%. ( Analiza charakterystyki paneli słonecznych na dachówkach ceramicznych i ceramicznych)

查看原文本刊更多论文

粘土和陶瓷屋面瓦上太阳能板的特性分析

一般来说，PLTS屋顶安装仅考虑要安装的电力容量和可用的屋顶面积。它没有考虑安装的屋顶材料的类型。同时，根据屋顶材料的类型，屋顶具有对阳光的吸收和不同的热性能。本研究的目的是从粘土瓦和瓷砖两种材料上观察太阳能电池板和屋顶之间的温度特性，其中太阳能电池板与天花板之间的高度对温度的影响及其对太阳能电池板效率的影响。基于本研究的结果，太阳能电池板和各种材料的屋顶（T3）之间的温度特性对太阳能电池板的效率值有影响，其中，粘土砖材料在33.77°C的温度（T3）下获得4.22%的最大效率值，瓷砖在5.69%的温度（T3）下获得最大效率值。其中太阳能电池板和天花板之间的高温的影响及其对太阳能电池板的效率的影响。基于这些测试的结果面板的效率对各种材料的面板和屋顶（T3）的温度特性有影响，其中瓷砖材料在（T3）33.77°C时的最大效率为4.22%，瓷砖在（T3”33.51°C时为5.69%。（陶瓷和瓷砖上太阳能电池板的特性分析）

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Review of Mechanical Engineering Engineering-Mechanical Engineering

CiteScore

1.90

自引率

0.00%

发文量

期刊介绍： The International Review of Mechanical Engineering (IREME) is a peer-reviewed journal that publishes original theoretical and applied papers on all fields of mechanics. The topics to be covered include, but are not limited to: kinematics and dynamics of rigid bodies, vehicle system dynamics, theory of machines and mechanisms, vibration and balancing of machine parts, stability of mechanical systems, computational mechanics, advanced materials and mechanics of materials and structures, plasticity, hydromechanics, aerodynamics, aeroelasticity, biomechanics, geomechanics, thermodynamics, heat transfer, refrigeration, fluid mechanics, energy conversion and management, micromechanics, nanomechanics, controlled mechanical systems, robotics, mechatronics, combustion theory and modelling, turbomachinery, manufacturing processes, new technology processes, non-destructive tests and evaluation, new and important applications and trends.