A new trochoidal toolpath in milling operations

IF 1.1 Q3 Engineering

Journal of Thermal Engineering Pub Date : 2023-04-11 DOI:10.18186/thermal.1281284

M. Kiyak, U. Emiroğlu, Orhun Baştekeli̇

引用次数: 0

Abstract

The milling is a widely used method in the manufacturing industry, especially in the production of complex engravings such as die&molds. Rough milling often requires a large material removal rate in a short time. This purpose also requires the selection and use of the best milling tool path. Today, trochoidal milling is receiving more attention than conventional milling, especially as it significantly increases tool life. In this study, a new toolpath model for trochoidal milling is suggested and this proposed toolpath model is examined in terms of cutting temperature, cutting force, surface quality, tool wear. In this new trochoidal toolpath model proposed for the milling method, the cutting force did not change much compared to the standard trochoidal tool path, but better surface quality and less tool wear were observed.

查看原文本刊更多论文

铣削加工中的一种新型刀具轨迹

铣削是制造业中广泛使用的方法，尤其是在模具等复杂雕刻品的生产中。粗铣削通常需要在短时间内获得较大的材料去除率。此目的还需要选择和使用最佳铣削刀具路径。如今，次摆线铣削比传统铣削更受关注，尤其是因为它显著延长了刀具寿命。在本研究中，提出了一种新的次摆线铣削刀具路径模型，并从切削温度、切削力、表面质量、刀具磨损等方面对所提出的刀具路径模型进行了检验。在为铣削方法提出的这种新的余摆线刀具路径模型中，与标准余摆线刀具轨迹相比，切削力没有太大变化，但观察到更好的表面质量和更少的刀具磨损。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Thermal Engineering THERMODYNAMICS-

CiteScore

2.40

自引率

18.20%

发文量

审稿时长

4 weeks

期刊介绍： Journal of Thermal Enginering is aimed at giving a recognized platform to students, researchers, research scholars, teachers, authors and other professionals in the field of research in Thermal Engineering subjects, to publish their original and current research work to a wide, international audience. In order to achieve this goal, we will have applied for SCI-Expanded Index in 2021 after having an Impact Factor in 2020. The aim of the journal, published on behalf of Yildiz Technical University in Istanbul-Turkey, is to not only include actual, original and applied studies prepared on the sciences of heat transfer and thermodynamics, and contribute to the literature of engineering sciences on the national and international areas but also help the development of Mechanical Engineering. Engineers and academicians from disciplines of Power Plant Engineering, Energy Engineering, Building Services Engineering, HVAC Engineering, Solar Engineering, Wind Engineering, Nanoengineering, surface engineering, thin film technologies, and Computer Aided Engineering will be expected to benefit from this journal’s outputs.