Improving traverse redundancy and precision by running on double lines

Abstract

Good redundancy is required to isolate gross errors and improve the qualities of derived parameters. Improving the weak redundancies of traditional traverses by traversing on double lines is now possible with total stations which provide for less cumbersome measurements than previously possible and more so now that control traverses are computed by least squares adjustment using readily available computer software. Traversing on double lines requires some care in choosing traverse stations with inter-visibility from two immediately preceding and two directly succeeding stations. Traverses were run on double lines resulting in redundancy increase of seven per station. Local accuracy precision parameters improved also by as much as 25% and 52% with implementation at 30% and 100% of the traverse stations respectively. A chart that may be used to determine percentage number of traverse stations where traversing on double lines would be implemented to achieve set local accuracy improvements is presented.