Impacts of mineralogy and pore throat structure on the movable fluid of tight sandstone gas reservoirs in coal measure strata: A case study of the Shanxi formation along the southeastern margin of the Ordos Basin
{"title":"Impacts of mineralogy and pore throat structure on the movable fluid of tight sandstone gas reservoirs in coal measure strata: A case study of the Shanxi formation along the southeastern margin of the Ordos Basin","authors":"Xinxu Dong , Xiangzhen Meng , Renhai Pu","doi":"10.1016/j.petrol.2022.111257","DOIUrl":null,"url":null,"abstract":"<div><p><span><span>Movable fluid content and permeability are important reference factors for reservoir quality evaluation and recovery enhancement. In this study, based on multiple experimental results, 10 typical samples from a tight sandstone gas reservoir in the coal measure strata of the Shanxi Formation along the southeastern margin of the Ordos Basin were divided into three lithofacies to discuss the factors influencing movable fluid content and permeability. The results show that the fluid has a strong seepage capacity and a high degree of mobility in relatively large pore throats. The relatively large pores in the study area are secondary dissolved pores of various origins. High quartz and feldspar contents are conducive to the formation of secondary pores, while the presence of </span>carbonate minerals<span> and clay minerals play an inhibitory role. The pore throat size range of 0.05–0.1 μm is the critical interval for the conversion of bound fluid to movable fluid. The movable fluid saturation and movable fluid porosity are affected by submicron- and micron-scale pore throats of >0.1 μm, while the permeability is controlled by micron-scale pore throats sizes of >1 μm. The </span></span>volumetric<span><span> proportion of the relatively large pore throats is influenced by the mineralogical composition<span> of the rock, the size of the pore throats, and the degree of sorting, which further control the amount of moveable fluid and its percolation capacity. The highest movable fluid content and permeability appear in the massive gravel-bearing coarse to medium sandstone lithofacies (Lm) with a high proportion of submicron- and micron-scale pore throats, whereas the lowest occurs in parallel bedding or ripple laminations,medium to fine sandstone lithofacies (Lpr) with a high proportion of nano-scale pore throats. The lithofacies with </span></span>cross bedding<span> and medium sandstone (Lc) is also dominated by nano-scale pore throats, which shows the characteristics of low movable fluid content and medium permeability due to the retention of some micron-scale pore throats. This study describes the mobility of fluids with different pore throat sizes in detail and determines the pore throat size range corresponding to the transition from bound fluid to movable fluid, which can provide a reference for the evaluation of movable fluid seepage in other regions.</span></span></p></div>","PeriodicalId":16717,"journal":{"name":"Journal of Petroleum Science and Engineering","volume":"220 ","pages":"Article 111257"},"PeriodicalIF":0.0000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"8","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Petroleum Science and Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0920410522011093","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"Earth and Planetary Sciences","Score":null,"Total":0}
引用次数: 8
Abstract
Movable fluid content and permeability are important reference factors for reservoir quality evaluation and recovery enhancement. In this study, based on multiple experimental results, 10 typical samples from a tight sandstone gas reservoir in the coal measure strata of the Shanxi Formation along the southeastern margin of the Ordos Basin were divided into three lithofacies to discuss the factors influencing movable fluid content and permeability. The results show that the fluid has a strong seepage capacity and a high degree of mobility in relatively large pore throats. The relatively large pores in the study area are secondary dissolved pores of various origins. High quartz and feldspar contents are conducive to the formation of secondary pores, while the presence of carbonate minerals and clay minerals play an inhibitory role. The pore throat size range of 0.05–0.1 μm is the critical interval for the conversion of bound fluid to movable fluid. The movable fluid saturation and movable fluid porosity are affected by submicron- and micron-scale pore throats of >0.1 μm, while the permeability is controlled by micron-scale pore throats sizes of >1 μm. The volumetric proportion of the relatively large pore throats is influenced by the mineralogical composition of the rock, the size of the pore throats, and the degree of sorting, which further control the amount of moveable fluid and its percolation capacity. The highest movable fluid content and permeability appear in the massive gravel-bearing coarse to medium sandstone lithofacies (Lm) with a high proportion of submicron- and micron-scale pore throats, whereas the lowest occurs in parallel bedding or ripple laminations,medium to fine sandstone lithofacies (Lpr) with a high proportion of nano-scale pore throats. The lithofacies with cross bedding and medium sandstone (Lc) is also dominated by nano-scale pore throats, which shows the characteristics of low movable fluid content and medium permeability due to the retention of some micron-scale pore throats. This study describes the mobility of fluids with different pore throat sizes in detail and determines the pore throat size range corresponding to the transition from bound fluid to movable fluid, which can provide a reference for the evaluation of movable fluid seepage in other regions.
期刊介绍:
The objective of the Journal of Petroleum Science and Engineering is to bridge the gap between the engineering, the geology and the science of petroleum and natural gas by publishing explicitly written articles intelligible to scientists and engineers working in any field of petroleum engineering, natural gas engineering and petroleum (natural gas) geology. An attempt is made in all issues to balance the subject matter and to appeal to a broad readership.
The Journal of Petroleum Science and Engineering covers the fields of petroleum (and natural gas) exploration, production and flow in its broadest possible sense. Topics include: origin and accumulation of petroleum and natural gas; petroleum geochemistry; reservoir engineering; reservoir simulation; rock mechanics; petrophysics; pore-level phenomena; well logging, testing and evaluation; mathematical modelling; enhanced oil and gas recovery; petroleum geology; compaction/diagenesis; petroleum economics; drilling and drilling fluids; thermodynamics and phase behavior; fluid mechanics; multi-phase flow in porous media; production engineering; formation evaluation; exploration methods; CO2 Sequestration in geological formations/sub-surface; management and development of unconventional resources such as heavy oil and bitumen, tight oil and liquid rich shales.