Thermogravimetric kinetic study of solid recovered fuels pyrolysis

IF 0.8 4区 工程技术 Q4 ENGINEERING, CHEMICAL
Miloš Radojević, M. Balac, V. Jovanović, D. Stojiljković, N. Manić
{"title":"Thermogravimetric kinetic study of solid recovered fuels pyrolysis","authors":"Miloš Radojević, M. Balac, V. Jovanović, D. Stojiljković, N. Manić","doi":"10.2298/HEMIND171009002R","DOIUrl":null,"url":null,"abstract":"In the Republic of Serbia there are significant quantities of coffee and tire wastes that can be utilized as Solid Recovered Fuel (SRF) and used as an additional fuel for co–combustion with coal and biomass in energy production and cement industry sectors. Differences between SRF and base fuel are cause of numerous problems in design of burners. The objective of this study was to determine the kinetic parameters for the thermochemical conversion of selected SRF using Simultaneous Thermal Analysis (STA). Samples of coffee and tire waste were used for the experimental tests. Thermal analysis was carried out in nitrogen atmosphere at three different heating rates 10, 15 and 20 K/min for each sample, while it was heated from room temperature up to 900°C. Two sample sizes x <0.25 mm and 0.25 < x <0.5 mm of each SRF were used in experiments, in order to obtain reliable Thermal Gravimetric Analysis (TGA) data for estimation of kinetic parameters for SRF pyrolysis. Experimental results were used for determination of pre-exponential factor and activation energy according to methods presented in the literature. Presented research provide valuable data of coffee and tire waste, that can be used for the burners design.","PeriodicalId":12913,"journal":{"name":"Hemijska Industrija","volume":null,"pages":null},"PeriodicalIF":0.8000,"publicationDate":"2018-04-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"10","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Hemijska Industrija","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.2298/HEMIND171009002R","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 10

Abstract

In the Republic of Serbia there are significant quantities of coffee and tire wastes that can be utilized as Solid Recovered Fuel (SRF) and used as an additional fuel for co–combustion with coal and biomass in energy production and cement industry sectors. Differences between SRF and base fuel are cause of numerous problems in design of burners. The objective of this study was to determine the kinetic parameters for the thermochemical conversion of selected SRF using Simultaneous Thermal Analysis (STA). Samples of coffee and tire waste were used for the experimental tests. Thermal analysis was carried out in nitrogen atmosphere at three different heating rates 10, 15 and 20 K/min for each sample, while it was heated from room temperature up to 900°C. Two sample sizes x <0.25 mm and 0.25 < x <0.5 mm of each SRF were used in experiments, in order to obtain reliable Thermal Gravimetric Analysis (TGA) data for estimation of kinetic parameters for SRF pyrolysis. Experimental results were used for determination of pre-exponential factor and activation energy according to methods presented in the literature. Presented research provide valuable data of coffee and tire waste, that can be used for the burners design.
固体回收燃料热解热重动力学研究
在塞尔维亚共和国,有大量的咖啡和轮胎废料可以用作固体回收燃料,并用作能源生产和水泥工业部门与煤和生物质共燃烧的额外燃料。SRF和基础燃料之间的差异导致了燃烧器设计中的许多问题。本研究的目的是利用同步热分析(STA)确定选定SRF热化学转化的动力学参数。咖啡和轮胎废料的样品被用于实验测试。热分析在氮气气氛中进行,每种样品以10、15和20 K/min三种不同的加热速率进行,同时从室温加热到900℃。为了获得可靠的热重分析(TGA)数据来估计SRF热解动力学参数,实验中采用了每种SRF的x <0.25 mm和0.25 < x <0.5 mm两种样品尺寸。实验结果根据文献方法测定了指前因子和活化能。本研究为咖啡和轮胎废弃物的研究提供了有价值的数据,可用于燃烧器的设计。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Hemijska Industrija
Hemijska Industrija 工程技术-工程:化工
CiteScore
1.60
自引率
11.10%
发文量
12
审稿时长
6-12 weeks
期刊介绍: The Journal Hemijska industrija (abbreviation Hem. Ind.) is publishing papers in the field of Chemical Engineering (Transport phenomena; Process Modeling, Simulation and Optimization; Thermodynamics; Separation Processes; Reactor Engineering; Electrochemical Engineering; Petrochemical Engineering), Biochemical Engineering (Bioreactors; Protein Engineering; Kinetics of Bioprocesses), Engineering of Materials (Polymers; Metal materials; Non-metal materials; Biomaterials), Environmental Engineeringand Applied Chemistry. The journal is published bimonthly by the Association of Chemical Engineers of Serbia (a member of EFCE - European Federation of Chemical Engineering). In addition to professional articles of importance to industry, scientific research papers are published, not only from our country but from all over the world. It also contains topics such as business news, science and technology news, information on new apparatus and equipment, and articles on environmental protection.
文献相关原料
公司名称 产品信息 采购帮参考价格
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信