NUMERICAL SIMULATION FOR THE MOTION RESPONSE OF AN OFFSHORE AHTS SHIP IN REGULAR AND IRREGULAR WAVES

Q4 Engineering
S. Păcuraru, L. Domnișoru, A. Bekhit
{"title":"NUMERICAL SIMULATION FOR THE MOTION RESPONSE OF AN OFFSHORE AHTS SHIP IN REGULAR AND IRREGULAR WAVES","authors":"S. Păcuraru, L. Domnișoru, A. Bekhit","doi":"10.54684/ijmmt.2022.14.3.181","DOIUrl":null,"url":null,"abstract":"This study aims at predicting the hydrodynamic response of an offshore AHTS vessel in regular and irregular waves. The study focuses on predicting the six degrees of freedom responses for ship in the operation condition when ship speed is equal to zero, at various heading angles (0, 45, 90, 135, 180, 225, 270, and 315˚) and for several wave frequencies (0.02~2.0 rad/s). The numerical simulation is carried out using the 3D diffraction/radiation Hydrostar software that is based on potential theory to predict the wave-body interactions. All the hydrostatics, loading and sailing aspects are initially estimated, and then introduced as an input in the simulation process corresponding to the ship speed and heading directions. For the irregular sea simulations, the ITTC spectrum is used to describe the wave for a generic case study in the Black Sea in order to make the study feasible for offshore applications in operational conditions. Further investigations are made using the ISIS_CFD viscous flow solver of the FINETM/Marine software (only for regular waves) to compare the obtained results. The results are presented for the ship response with a considered accuracy based on the previous validations performed by the authors for similar ships.","PeriodicalId":38009,"journal":{"name":"International Journal of Modern Manufacturing Technologies","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Modern Manufacturing Technologies","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.54684/ijmmt.2022.14.3.181","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0

Abstract

This study aims at predicting the hydrodynamic response of an offshore AHTS vessel in regular and irregular waves. The study focuses on predicting the six degrees of freedom responses for ship in the operation condition when ship speed is equal to zero, at various heading angles (0, 45, 90, 135, 180, 225, 270, and 315˚) and for several wave frequencies (0.02~2.0 rad/s). The numerical simulation is carried out using the 3D diffraction/radiation Hydrostar software that is based on potential theory to predict the wave-body interactions. All the hydrostatics, loading and sailing aspects are initially estimated, and then introduced as an input in the simulation process corresponding to the ship speed and heading directions. For the irregular sea simulations, the ITTC spectrum is used to describe the wave for a generic case study in the Black Sea in order to make the study feasible for offshore applications in operational conditions. Further investigations are made using the ISIS_CFD viscous flow solver of the FINETM/Marine software (only for regular waves) to compare the obtained results. The results are presented for the ship response with a considered accuracy based on the previous validations performed by the authors for similar ships.
近海风轮在规则波和不规则波中运动响应的数值模拟
本研究旨在预测海上AHTS船舶在规则和不规则波浪中的水动力响应。该研究的重点是预测船舶在不同航向角(0、45、90、135、180、225、270和315˚)和几个波浪频率(0.02~2.0 rad/s)下,在速度等于零的运行条件下的六个自由度响应。使用基于势理论的3D衍射/辐射Hydrostar软件进行数值模拟,以预测波体相互作用。最初估计了所有的静水力学、载荷和航行方面,然后将其作为模拟过程中与船舶速度和航向相对应的输入。对于不规则海洋模拟,ITTC频谱用于描述黑海一般案例研究的波浪,以使该研究在操作条件下适用于海上应用。使用FINETM/Marine软件的ISIS_CFD粘性流求解器(仅适用于规则波)进行了进一步的研究,以比较所获得的结果。基于作者之前对类似船舶进行的验证,给出了船舶响应的结果,并考虑了准确性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
International Journal of Modern Manufacturing Technologies
International Journal of Modern Manufacturing Technologies Engineering-Industrial and Manufacturing Engineering
CiteScore
0.70
自引率
0.00%
发文量
15
期刊介绍: The main topics of the journal are: Micro & Nano Technologies; Rapid Prototyping Technologies; High Speed Manufacturing Processes; Ecological Technologies in Machine Manufacturing; Manufacturing and Automation; Flexible Manufacturing; New Manufacturing Processes; Design, Control and Exploitation; Assembly and Disassembly; Cold Forming Technologies; Optimization of Experimental Research and Manufacturing Processes; Maintenance, Reliability, Life Cycle Time and Cost; CAD/CAM/CAE/CAX Integrated Systems; Composite Materials Technologies; Non-conventional Technologies; Concurrent Engineering; Virtual Manufacturing; Innovation, Creativity and Industrial Development.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信