CORROSION PREVENTION ON S45C USING HARDENING METHOD

Q4 Engineering

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI:10.54684/ijmmt.2022.14.2.208

Muhammad Akhlis Rizza, Ratna Monasari, Z. Emzain, Asrori Asrori, Ilham Krissetyawan Nusantara

引用次数: 0

Abstract

This study aims to determine the effect of holding time and oil viscosity on the S45C steel hardening process on the corrosion rate. The corrosion rate is measured using the weight loss method. Micro-photo observations of the S45C steel surface were carried out to determine the type of corrosion. The results demonstrate that the corrosion rate of hardened S45C steel decreases following the longer holding time during hardening. In addition, the corrosion rate of hardened S45C steel decreases when the viscosity of the oil used during hardening is thicker. Finally, the type of corrosion is uniform and pitting corrosion.

查看原文本刊更多论文

S45C的硬化防腐

本研究旨在确定S45C钢硬化过程中保温时间和油粘度对腐蚀速率的影响。腐蚀速率采用失重法测量。对S45C钢表面进行了显微照片观察，以确定腐蚀类型。结果表明:硬化过程中保温时间越长，硬化后的S45C钢的腐蚀速率越低;硬化时所用油的粘度越厚，硬化后S45C钢的腐蚀速率越低。最后，腐蚀类型为均匀腐蚀和点蚀。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Modern Manufacturing Technologies Engineering-Industrial and Manufacturing Engineering

CiteScore

0.70

自引率

0.00%

发文量

期刊介绍： The main topics of the journal are: Micro & Nano Technologies; Rapid Prototyping Technologies; High Speed Manufacturing Processes; Ecological Technologies in Machine Manufacturing; Manufacturing and Automation; Flexible Manufacturing; New Manufacturing Processes; Design, Control and Exploitation; Assembly and Disassembly; Cold Forming Technologies; Optimization of Experimental Research and Manufacturing Processes; Maintenance, Reliability, Life Cycle Time and Cost; CAD/CAM/CAE/CAX Integrated Systems; Composite Materials Technologies; Non-conventional Technologies; Concurrent Engineering; Virtual Manufacturing; Innovation, Creativity and Industrial Development.