Microwave-assisted biosynthesis and characterization of ZnO film for photocatalytic application in methylene blue degradation

Q3 Engineering
Ari Sulistyo Rini, Averin Nabilla, Y. Rati
{"title":"Microwave-assisted biosynthesis and characterization of ZnO film for photocatalytic application in methylene blue degradation","authors":"Ari Sulistyo Rini, Averin Nabilla, Y. Rati","doi":"10.21924/cst.6.2.2021.484","DOIUrl":null,"url":null,"abstract":"This study aims to investigate the physical characteristics and photocatalyst activity of biosynthesized ZnO with pineapple (Ananas comosus) peel extract under microwave irradiation. The ZnO powder was prepared in two different concentrations of zinc nitrate hexahydrate (ZNH) at 200mM (Z-200) and 500 mM (Z-500). The optical, structural, and morphological properties of ZnO were analyzed using UV-Vis spectroscopy, X-Ray Diffraction (XRD), and Scanning Electron Microscopy (SEM), respectively. The UV-Vis absorption spectrum showed a wide absorbance peak of ZnO at the wavelength of 300-360 nm with a bandgap energy of 3.22 and 3.25 eV. The XRD result confirmed the wurtzite structure of ZnO with high crystallinity. SEM morphology showed spherical particles with an average particle size of 190-220 nm. For photocatalytic application, ZnO film was fabricated via the doctor blade method from microwave-assisted biosynthesized ZnO powder. ZnO films were then applied under UV-irradiation to examine the photocatalytic degradation of methylene blue. It was found that the catalytic behavior of ZnO film was affected by the starting ZNH concentration with maximum effectiveness of 46% degradation after 2 h.","PeriodicalId":36437,"journal":{"name":"Communications in Science and Technology","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2021-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"8","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Communications in Science and Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.21924/cst.6.2.2021.484","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 8

Abstract

This study aims to investigate the physical characteristics and photocatalyst activity of biosynthesized ZnO with pineapple (Ananas comosus) peel extract under microwave irradiation. The ZnO powder was prepared in two different concentrations of zinc nitrate hexahydrate (ZNH) at 200mM (Z-200) and 500 mM (Z-500). The optical, structural, and morphological properties of ZnO were analyzed using UV-Vis spectroscopy, X-Ray Diffraction (XRD), and Scanning Electron Microscopy (SEM), respectively. The UV-Vis absorption spectrum showed a wide absorbance peak of ZnO at the wavelength of 300-360 nm with a bandgap energy of 3.22 and 3.25 eV. The XRD result confirmed the wurtzite structure of ZnO with high crystallinity. SEM morphology showed spherical particles with an average particle size of 190-220 nm. For photocatalytic application, ZnO film was fabricated via the doctor blade method from microwave-assisted biosynthesized ZnO powder. ZnO films were then applied under UV-irradiation to examine the photocatalytic degradation of methylene blue. It was found that the catalytic behavior of ZnO film was affected by the starting ZNH concentration with maximum effectiveness of 46% degradation after 2 h.
微波辅助合成ZnO薄膜及其光催化降解亚甲蓝的研究
本研究旨在研究微波辐照下菠萝皮提取物生物合成氧化锌的物理特性和光催化活性。在200mM (Z-200)和500 mM (Z-500)两种不同浓度的六水硝酸锌(ZNH)中制备ZnO粉体。利用紫外可见光谱(UV-Vis)、x射线衍射(XRD)和扫描电子显微镜(SEM)分析了ZnO的光学、结构和形态特性。紫外可见吸收光谱显示ZnO在300 ~ 360 nm波长处有较宽的吸收峰,带隙能量分别为3.22和3.25 eV。XRD结果证实ZnO具有高结晶度的纤锌矿结构。SEM形貌为球形颗粒,平均粒径为190 ~ 220 nm。以微波辅助生物合成的氧化锌粉体为原料,采用医生刀法制备了光催化用氧化锌薄膜。将ZnO薄膜置于紫外照射下,考察其光催化降解亚甲基蓝的性能。研究发现,ZnO膜的催化行为受起始ZNH浓度的影响,2 h后降解率最高可达46%。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Communications in Science and Technology
Communications in Science and Technology Engineering-Engineering (all)
CiteScore
3.20
自引率
0.00%
发文量
13
审稿时长
24 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信