Numerical and experimental investigation of two phase flow geometrical characteristics

Abstract

Abstract This paper presents an experimental and numerical analysis of the effect of the geometric parameter on the two-phase flow (white kerosene-water) flow pattern system. The investigation was carried out using three lengths (1, 2 and 3) m of rectangular horizontal smooth channel and three channel heights of (5, 7.5 and 10) cm respectively. The flow conditions for the input water velocity (0.2 m/s) and the input kerosene velocity (0.1 m/s) for both measurements have been investigated. Two-inlet techniques have been employed. Firstly, at the inlet, the kerosene was on top of the bath. Then, second, from the center, the kerosene inlets (water is above and below the kerosene). A numerical verification analysis was introduced using the ANSYS software using the method of volume of fluid (VOF) and mixture multiphase flow modeling coupled with the normal k-ε turbulence schemes. A collection of seven methods of CFD types is explored by running 224 instances. Comparisons were made between numerical and experimental works.