Investigate of Wear Behaviour and Mechanical Properties of Titanium Diboride Reinforced AMMC Composites

IF 0.7 4区材料科学 Q4 ELECTROCHEMISTRY

Journal of New Materials For Electrochemical Systems Pub Date : 2021-12-31 DOI:10.14447/jnmes.v24i4.a04

R. S, L. S, V. R, Madhan Prabhu Deva B S

引用次数: 1

Abstract

Received: June 2-2021 Accepted: September 30-2021 Aluminium materials are more consumed in the construction and automotive sector for their less corrosion and good machinability. The tribological properties of aluminium can improve while adding reinforcement particles such as Titanium Boride, SiC, Al2O3, etc. This paper investigates the tribological and mechanical characteristics of the Al7075TiB2 composite to improve its strength and hardness. The TiB2 is reinforced with various ratios like 6%, 12%, 15% for testing purposes. The boride powder was used to preheat up to 830oC with Al7075 for proper mixing. The mechanical properties (tensile and hardness) and metallurgical properties (Wear and Microstructural) are investigated through prepared samples. The composition of Al7075TiB2 can analyse with the help of the EDAX process. .

查看原文本刊更多论文

二硼化钛增强AMMC复合材料的磨损行为和力学性能研究

收到时间：2021年6月2日至2021年9月30日接受时间：建筑和汽车行业消耗更多的铝材料，因为它们腐蚀性小，可加工性好。添加氮化钛、SiC、Al2O3等增强颗粒可以改善铝的摩擦学性能。本文研究了Al7075TiB2复合材料的摩擦学和力学特性，以提高其强度和硬度。出于测试目的，TiB2以不同的比例增强，如6%、12%、15%。硼化物粉末用Al7075预热至830℃，以进行适当混合。通过制备的样品研究了力学性能（拉伸和硬度）和冶金性能（磨损和微观结构）。Al7075TiB2的组成可借助EDAX法进行分析。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of New Materials For Electrochemical Systems ELECTROCHEMISTRY-MATERIALS SCIENCE, MULTIDISCIPLINARY

CiteScore

1.90

自引率

0.00%

发文量

审稿时长

>12 weeks

期刊介绍： This international Journal is intended for the publication of original work, both analytical and experimental, and of reviews and commercial aspects related to the field of New Materials for Electrochemical Systems. The emphasis will be on research both of a fundamental and an applied nature in various aspects of the development of new materials in electrochemical systems.