Optimization of Adhesively Bonded Spar-Wingskin Joints of Laminated FRP Composites Subjected to Pull-Off Load: A Critical Review

IF 3.5 Q2 Materials Science

Reviews of Adhesion and Adhesives Pub Date : 2020-03-01 DOI:10.7569/raa.2020.097303

S. Rakshe, S. Nimje, S. K. Panigrahi

{"title":"Optimization of Adhesively Bonded Spar-Wingskin Joints of Laminated FRP Composites Subjected to Pull-Off Load: A Critical Review","authors":"S. Rakshe, S. Nimje, S. K. Panigrahi","doi":"10.7569/raa.2020.097303","DOIUrl":null,"url":null,"abstract":"A review on optimization of adhesively bonded spar-wingskin joint (SWJ) of laminated fiber reinforced polymer (FRP) composites subjected to pull-off load is presented in this article using three-dimensional finite element analysis. Von Mises stress components have been computed across\n the width of joint at different interfaces viz. load coupler-spar, and load coupler-wingskin interfaces. Further, the weight of SWJ structure is considered as the objective function which needs to be minimized for optimization. In the first step, the material and lamination scheme of the FRP\n composite materials used for SWJ are optimized, and, in the second step, the geometrical parameters have been optimized on the basis of minimum von Mises stress and weight. Further, the effects of the material, lamination scheme, and geometrical parameters on the von Mises stress and weight\n have been validated using the Analysis of Variance (ANOVA) approach as prescribed by the Taguchi method. The results show that the material and spar thickness are the most significant factors influencing von Mises stress. The weight analysis reveals that there is a significant effect of change\n in material and wingskin thickness on SWJ performance. Suitable design recommendations have been made for SWJ in terms of material, lamination scheme and geometrical parameters.","PeriodicalId":43792,"journal":{"name":"Reviews of Adhesion and Adhesives","volume":" ","pages":""},"PeriodicalIF":3.5000,"publicationDate":"2020-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"8","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Reviews of Adhesion and Adhesives","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.7569/raa.2020.097303","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Materials Science","Score":null,"Total":0}

引用次数: 8

Abstract

A review on optimization of adhesively bonded spar-wingskin joint (SWJ) of laminated fiber reinforced polymer (FRP) composites subjected to pull-off load is presented in this article using three-dimensional finite element analysis. Von Mises stress components have been computed across the width of joint at different interfaces viz. load coupler-spar, and load coupler-wingskin interfaces. Further, the weight of SWJ structure is considered as the objective function which needs to be minimized for optimization. In the first step, the material and lamination scheme of the FRP composite materials used for SWJ are optimized, and, in the second step, the geometrical parameters have been optimized on the basis of minimum von Mises stress and weight. Further, the effects of the material, lamination scheme, and geometrical parameters on the von Mises stress and weight have been validated using the Analysis of Variance (ANOVA) approach as prescribed by the Taguchi method. The results show that the material and spar thickness are the most significant factors influencing von Mises stress. The weight analysis reveals that there is a significant effect of change in material and wingskin thickness on SWJ performance. Suitable design recommendations have been made for SWJ in terms of material, lamination scheme and geometrical parameters.

查看原文本刊更多论文

拉脱载荷作用下FRP复合材料粘接翼皮-翼皮接头的优化研究

本文采用三维有限元分析方法，对层合纤维增强聚合物（FRP）复合材料在拉脱载荷作用下的翼梁翼皮节点（SWJ）的优化设计进行了综述。Von Mises应力分量已在不同界面（即荷载耦合器翼梁和荷载耦合器翼板界面）的整个接头宽度上进行了计算。此外，SWJ结构的权重被认为是需要最小化以进行优化的目标函数。在第一步中，对用于SWJ的FRP复合材料的材料和层压方案进行了优化，在第二步中，基于最小von Mises应力和重量对几何参数进行了优化。此外，材料、层压方案和几何参数对von Mises应力和重量的影响已经使用田口方法规定的方差分析（ANOVA）方法进行了验证。结果表明，材料和翼梁厚度是影响von Mises应力的最重要因素。重量分析表明，材料和翼皮厚度的变化对SWJ性能有显著影响。从材料、层压方案和几何参数方面对SWJ提出了合适的设计建议。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Reviews of Adhesion and Adhesives MATERIALS SCIENCE, MULTIDISCIPLINARY-

自引率

0.00%

发文量

期刊介绍： With the explosion of research activity and reports, the need for concise and critical reviews of topics of contemporary research interest is manifest. Reviews of Adhesion and Adhesives (RAA) provides in-depth, incisive, illuminating and thought-provoking reviews written by subject matter experts covering all aspects of adhesion science and adhesive technology. Each review will be imbued with the author’s experience so that the reader will be able to assimilate the research in the area discussed easily and will be able to apply it in practice.The journal has relevance to a myriad of industries including textiles, printing, coatings, aerospace, medical, nanotechnology, biotechnology, building and construction, and microelectronics. The topics to be covered include, but not limited to, basic and theoretical aspects of adhesion; modeling of adhesion phenomena; mecha¬nisms of adhesion; surface and interfacial analysis and characterization; unraveling of events at interfaces; characterization of interphases; adhesion of thin films and coatings; adhesion aspects in reinforced composites; formation, characterization and durability of adhesive joints; surface preparation methods; polymer surface modification; biological adhesion; particle adhesion; adhesion of metallized plastics; adhesion of diamond-like films; adhesion pro¬moters; contact angle, wettability· and adhesion; superhydrophobicity and superhydrophilicity. With regard to adhesives, RAA will include, but not limited to, green adhesives; novel and high-performance adhesives; and medical adhesive applications.