Mechanism of AlP modifying the morphology of Si in Al-20Si alloys based on experimental studies and first-principles calculations

IF 1.3 4区 材料科学 Q3 METALLURGY & METALLURGICAL ENGINEERING
Y. Gu, G. Peng, Xiaoyun Fu, G. S. Song, S.S. Chen, S.Y. Chen
{"title":"Mechanism of AlP modifying the morphology of Si in Al-20Si alloys based on experimental studies and first-principles calculations","authors":"Y. Gu, G. Peng, Xiaoyun Fu, G. S. Song, S.S. Chen, S.Y. Chen","doi":"10.1080/13640461.2023.2204041","DOIUrl":null,"url":null,"abstract":"ABSTRACT The modifying influence of aluminium phosphide to the morphology of primary Si and eutectic Si was investigated in hypereutectic Al-20Si alloys via adding Al-Cu-P master alloy (0.5, 1, 20 wt.%). Microstructural results showed when Al-Cu-P addition from 0 to 0.5%, primary Si phase decreases and eutectic Si phase size remains invariable; when addition higher than 0.5%, primary Si phase keeps invariable, eutectic Si phase size increases. To prove the nucleation effect of AlP on Si phase, interfacial properties of Si/AlP interface were investigated using first-principles calculations. Results showed the AlP(100)/Si(100) interface energy is between −1.45 J/m2 and −1.38 J/m2 for Al-terminated and P-terminated AlP model, both is much smaller than liquid Si/crystalline Si interface (0.34 J/m2), consolidates that AlP particles possess strong nucleation potency for Si phases. Therefore, the modifying influence of AlP to the morphology Si phase is well clarified as a function of AlP content in Al-20Si alloys. ","PeriodicalId":13939,"journal":{"name":"International Journal of Cast Metals Research","volume":"36 1","pages":"56 - 64"},"PeriodicalIF":1.3000,"publicationDate":"2023-04-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Cast Metals Research","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/13640461.2023.2204041","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

Abstract

ABSTRACT The modifying influence of aluminium phosphide to the morphology of primary Si and eutectic Si was investigated in hypereutectic Al-20Si alloys via adding Al-Cu-P master alloy (0.5, 1, 20 wt.%). Microstructural results showed when Al-Cu-P addition from 0 to 0.5%, primary Si phase decreases and eutectic Si phase size remains invariable; when addition higher than 0.5%, primary Si phase keeps invariable, eutectic Si phase size increases. To prove the nucleation effect of AlP on Si phase, interfacial properties of Si/AlP interface were investigated using first-principles calculations. Results showed the AlP(100)/Si(100) interface energy is between −1.45 J/m2 and −1.38 J/m2 for Al-terminated and P-terminated AlP model, both is much smaller than liquid Si/crystalline Si interface (0.34 J/m2), consolidates that AlP particles possess strong nucleation potency for Si phases. Therefore, the modifying influence of AlP to the morphology Si phase is well clarified as a function of AlP content in Al-20Si alloys. 
基于实验研究和第一性原理计算的AlP改性Al-20Si合金中Si形态的机理
摘要通过添加Al-Cu-P中间合金(0.5,1,20 显微组织研究结果表明,当Al-Cu-P的添加量为0~0.5%时,初生硅相减少,共晶硅相尺寸不变;当添加量大于0.5%时,初生硅相保持不变,共晶硅相尺寸增大。为了证明AlP对Si相的成核作用,利用第一性原理计算研究了Si/AlP界面的界面性质。结果表明,对于Al封端和P封端的AlP模型,AlP(100)/Si(100)界面能在−1.45 J/m2和−1.38 J/m2之间,两者都远小于液体Si/晶体Si界面(0.34 J/m2),这巩固了AlP颗粒对Si相具有强成核能力。因此,AlP对形态Si相的改性影响作为Al-20Si合金中AlP含量的函数得到了很好的阐明。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
CiteScore
2.70
自引率
7.10%
发文量
14
审稿时长
7.5 months
期刊介绍: The International Journal of Cast Metals Research is devoted to the dissemination of peer reviewed information on the science and engineering of cast metals, solidification and casting processes. Assured production of high integrity castings requires an integrated approach that optimises casting, mould and gating design; mould materials and binders; alloy composition and microstructure; metal melting, modification and handling; dimensional control; and finishing and post-treatment of the casting. The Journal reports advances in both the fundamental science and materials and production engineering contributing to the successful manufacture of fit for purpose castings.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信