Development of Methods for Obtaining Carbon Adsorbents Based on Angren Coal and Oil Residues

Abstract

Currently, activated carbon adsorbents are widely used in the world for industrial wastewater treatment from various organic compounds, sorption of heavy metal ions and life-threatening radioactive substances. Carbon adsorbents with hydrophobic properties are mainly modified based on the brown coal, coke, scape, and bark of plants. The methods of manufacturing coal adsorbents based on Angren coal, petroleum coke and asphaltenes are listed. The physicochemical composition and complete thermodynamic properties of the activated carbon adsorbent were studied. It was found that during the heat treatment of mixtures of carbonaceous raw materials, its mass is lost with increasing temperature. At the same time, the adsorption activity of iodine increases with increasing temperature. Depending on the change in temperature of the obtained carbon adsorbent samples, the calculated surface area with respect to iodine is 280.7 m2/g with a weight loss of 0.2 g. The differential heat of adsorption, isotherm, molar entropy and thermokinetics of the benzene and toluene molecules studied in the article are calculated. The adsorption of 4.5 mmol/g of benzene and 3.5 mmol/g of toluene on the activated carbon adsorbent was determined. It is noted that during the adsorption of benzene and toluene by the obtained adsorbent from activated carbon, the differential heat of reaction gradually decreases. When recalculating the isothermal adsorption of benzene and toluene on activated carbon according to the equation of the volumetric theory of micropore saturation, it was obtained that 84.5 % of benzene and 94.2 % of toluene were adsorbed on the pores of the adsorbent.