Manufacturing of spur gears having normal teeth on different pressure angles by module disc milling cutter

Q2 Engineering

International Review of Applied Sciences and Engineering Pub Date : 2022-04-05 DOI:10.1556/1848.2022.00418

S. Bodzás

{"title":"Manufacturing of spur gears having normal teeth on different pressure angles by module disc milling cutter","authors":"S. Bodzás","doi":"10.1556/1848.2022.00418","DOIUrl":null,"url":null,"abstract":"\n The aim of this study is the manufacturing analysis of five spur gear pairs where the initial geometric parameters are the same only the pressure angle is different. Firstly, the gears must be designed and modelled. After that, I analyse the modification of this geometric parameter for the manufacturing parameters of the pinion and the gear in the case of gear cutting by module disc milling cutter. Using this technology the one tooth cutting can repeat from tooth to tooth in the function of the number of teeth. I would like to find correlations between the pressure angle and the manufacturing parameters. For this purpose, I define the initial technological parameters and calculate necessary technological parameters for the manufacturing process in a general way. I also define the manufacturing parameters for the given gear geometries. This analysis is practical and theoretical at the same time since the results and the process can help the manufacturing engineers to develop the gear manufacturing processes and applying my results for similar manufacturing problems.","PeriodicalId":37508,"journal":{"name":"International Review of Applied Sciences and Engineering","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-04-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Review of Applied Sciences and Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1556/1848.2022.00418","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Engineering","Score":null,"Total":0}

引用次数: 0

Abstract

The aim of this study is the manufacturing analysis of five spur gear pairs where the initial geometric parameters are the same only the pressure angle is different. Firstly, the gears must be designed and modelled. After that, I analyse the modification of this geometric parameter for the manufacturing parameters of the pinion and the gear in the case of gear cutting by module disc milling cutter. Using this technology the one tooth cutting can repeat from tooth to tooth in the function of the number of teeth. I would like to find correlations between the pressure angle and the manufacturing parameters. For this purpose, I define the initial technological parameters and calculate necessary technological parameters for the manufacturing process in a general way. I also define the manufacturing parameters for the given gear geometries. This analysis is practical and theoretical at the same time since the results and the process can help the manufacturing engineers to develop the gear manufacturing processes and applying my results for similar manufacturing problems.

查看原文本刊更多论文

用模数圆盘铣刀制造不同压力角正齿正齿轮

本研究的目的是在初始几何参数相同，只有压力角不同的情况下，对五种直齿齿轮副进行制造分析。首先，必须对齿轮进行设计和建模。在此基础上，分析了在模数圆盘铣刀切削齿轮的情况下，该几何参数对小齿轮和齿轮加工参数的修正。利用该技术可实现单齿切割在齿数上的重复。我想找出压力角和制造参数之间的相关性。为此，我定义了初始工艺参数，并以一般的方式计算了制造过程所需的工艺参数。我还定义了给定齿轮几何形状的制造参数。该分析具有实用性和理论性，因为结果和过程可以帮助制造工程师开发齿轮制造工艺，并将我的结果应用于类似的制造问题。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Review of Applied Sciences and Engineering Materials Science-Materials Science (miscellaneous)

CiteScore

2.30

自引率

0.00%

发文量

审稿时长

46 weeks

期刊介绍： International Review of Applied Sciences and Engineering is a peer reviewed journal. It offers a comprehensive range of articles on all aspects of engineering and applied sciences. It provides an international and interdisciplinary platform for the exchange of ideas between engineers, researchers and scholars within the academy and industry. It covers a wide range of application areas including architecture, building services and energetics, civil engineering, electrical engineering and mechatronics, environmental engineering, mechanical engineering, material sciences, applied informatics and management sciences. The aim of the Journal is to provide a location for reporting original research results having international focus with multidisciplinary content. The published papers provide solely new basic information for designers, scholars and developers working in the mentioned fields. The papers reflect the broad categories of interest in: optimisation, simulation, modelling, control techniques, monitoring, and development of new analysis methods, equipment and system conception.