Wavelength switchable and stable single-longitudinal-mode erbium-doped fiber laser based on Mach–Zehnder interferometer and tunable filter

IF 6.7 3区 工程技术 Q1 ENGINEERING, ELECTRICAL & ELECTRONIC
W. He, Lianqing Zhu, M. Dong, Fei Luo
{"title":"Wavelength switchable and stable single-longitudinal-mode erbium-doped fiber laser based on Mach–Zehnder interferometer and tunable filter","authors":"W. He, Lianqing Zhu, M. Dong, Fei Luo","doi":"10.1080/15599612.2018.1473539","DOIUrl":null,"url":null,"abstract":"Abstract An erbium-doped fiber laser with all-fiber Mach–Zehnder interferometer (MZI) and tunable filter was proposed and experimentally demonstrated. In the designed fiber laser, 6 m C-band erbium-doped fiber was selected as a gain medium; the MZI comprised two waist-enlarged fiber bitapers. In the experiment, the laser threshold was 93 mW, whereas a switchable single-longitudinal-mode laser was realized within 1519.7–1564.6 nm by adjusting the tunable filter and the line interval was less than 2.5 nm; for single-wavelength laser, the peak power difference of each line was less than 4 dB, and the power fluctuation was less than 0.77 dB within 10-min scan time. A stable and switchable dual-wavelength laser was realized, the wavelength spacing of each dual-wavelength laser was less than 0.7 nm, the side-mode suppression ratio was more than 30.2 dB, and the power shift was less than 0.39 dB. The laser’s 3-dB linewidth was less than 0.1 nm.","PeriodicalId":50296,"journal":{"name":"International Journal of Optomechatronics","volume":"12 1","pages":"31 - 39"},"PeriodicalIF":6.7000,"publicationDate":"2018-01-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1080/15599612.2018.1473539","citationCount":"6","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Optomechatronics","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1080/15599612.2018.1473539","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 6

Abstract

Abstract An erbium-doped fiber laser with all-fiber Mach–Zehnder interferometer (MZI) and tunable filter was proposed and experimentally demonstrated. In the designed fiber laser, 6 m C-band erbium-doped fiber was selected as a gain medium; the MZI comprised two waist-enlarged fiber bitapers. In the experiment, the laser threshold was 93 mW, whereas a switchable single-longitudinal-mode laser was realized within 1519.7–1564.6 nm by adjusting the tunable filter and the line interval was less than 2.5 nm; for single-wavelength laser, the peak power difference of each line was less than 4 dB, and the power fluctuation was less than 0.77 dB within 10-min scan time. A stable and switchable dual-wavelength laser was realized, the wavelength spacing of each dual-wavelength laser was less than 0.7 nm, the side-mode suppression ratio was more than 30.2 dB, and the power shift was less than 0.39 dB. The laser’s 3-dB linewidth was less than 0.1 nm.
基于Mach-Zehnder干涉仪和可调谐滤波器的波长可切换稳定单模掺铒光纤激光器
摘要提出了一种采用全光纤马赫-曾德尔干涉仪和可调谐滤波器的掺铒光纤激光器,并进行了实验验证。在设计的光纤激光器中,选择6 m c波段掺铒光纤作为增益介质;MZI包括两个腰部增大的纤维咬人器。在实验中,激光阈值为93 mW,而通过调节可调谐滤波器,在1519.7 ~ 1564.6 nm范围内实现了可切换的单纵模激光,线间隔小于2.5 nm;对于单波长激光器,每条线的峰值功率差小于4 dB, 10 min扫描时间内的功率波动小于0.77 dB。实现了稳定可切换的双波长激光器,每个双波长激光器的波长间距小于0.7 nm,侧模抑制比大于30.2 dB,功率漂移小于0.39 dB。激光的3db线宽小于0.1 nm。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
International Journal of Optomechatronics
International Journal of Optomechatronics 工程技术-工程:电子与电气
CiteScore
9.30
自引率
0.00%
发文量
3
审稿时长
3 months
期刊介绍: International Journal of Optomechatronics publishes the latest results of multidisciplinary research at the crossroads between optics, mechanics, fluidics and electronics. Topics you can submit include, but are not limited to: -Adaptive optics- Optomechanics- Machine vision, tracking and control- Image-based micro-/nano- manipulation- Control engineering for optomechatronics- Optical metrology- Optical sensors and light-based actuators- Optomechatronics for astronomy and space applications- Optical-based inspection and fault diagnosis- Micro-/nano- optomechanical systems (MOEMS)- Optofluidics- Optical assembly and packaging- Optical and vision-based manufacturing, processes, monitoring, and control- Optomechatronics systems in bio- and medical technologies (such as optical coherence tomography (OCT) systems or endoscopes and optical based medical instruments)
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信