FEM Applications of Catenary Type Structures

Q2 Engineering

INCAS Bulletin Pub Date : 2022-12-02 DOI:10.13111/2066-8201.2022.14.4.2

Viorel Anghel, S. Sorohan, D. Hodor

引用次数: 0

Abstract

The paper deals with Finite Element Modeling of catenary type structures starting from practical problems related to a single cable segment in the case of an electric transmission line. Finite element models allow the analysis of the resulting deformed position and stress state for a given configuration obtained by using the geometric and physical data of a cable. Beam type linear/nonlinear finite element models which can take into account also the temperature variation and extra loading on the cable were developed. Another application of this type of models is for the case of form finding of aerial refueling cable subjected to dynamic pressure. The results were obtained by the commercial finite element software ANSYS.

查看原文本刊更多论文

接触网型结构的有限元应用

本文从输电线路中单个电缆段的实际问题出发，对接触网型结构进行了有限元建模。有限元模型允许使用电缆的几何和物理数据对给定结构的变形位置和应力状态进行分析。建立了考虑温度变化和附加荷载的梁型线性/非线性有限元模型。这类模型的另一个应用是在动压作用下空中加油索的求形。计算结果采用商用有限元软件ANSYS进行计算。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

INCAS Bulletin Engineering-Aerospace Engineering

自引率

0.00%

发文量

审稿时长

8 weeks

期刊介绍： INCAS BULLETIN is a scientific quartely journal published by INCAS – National Institute for Aerospace Research “Elie Carafoli” (under the aegis of The Romanian Academy) Its current focus is the aerospace field, covering fluid mechanics, aerodynamics, flight theory, aeroelasticity, structures, applied control, mechatronics, experimental aerodynamics, computational methods. All submitted papers are peer-reviewed. The journal will publish reports and short research original papers of substance. Unique features distinguishing this journal: R & D reports in aerospace sciences in Romania The INCAS BULLETIN of the National Institute for Aerospace Research "Elie Carafoli" includes the following sections: 1) FULL PAPERS. -Strength of materials, elasticity, plasticity, aeroelasticity, static and dynamic analysis of structures, vibrations and impact. -Systems, mechatronics and control in aerospace. -Materials and tribology. -Kinematics and dynamics of mechanisms, friction, lubrication. -Measurement technique. -Aeroacoustics, ventilation, wind motors. -Management in Aerospace Activities. 2) TECHNICAL-SCIENTIFIC NOTES and REPORTS. Includes: case studies, technical-scientific notes and reports on published areas. 3) INCAS NEWS. Promote and emphasise INCAS technical base and achievements. 4) BOOK REVIEWS.