{"title":"CO2 diffusion in dry and hydrous leucititic melt","authors":"Lennart Koch, B. Schmidt","doi":"10.5194/ejm-35-117-2023","DOIUrl":null,"url":null,"abstract":"Abstract. Using the diffusion couple technique, diffusion of\nCO2 in a leucititic melt from the Colli Albani Volcanic District in\nItaly was investigated at temperatures between 1200 and 1350 ∘C\nin an internally heated pressure vessel at 300 MPa. To examine the effect of\ndissolved H2O in the melt, experiments were performed for a nominally\ndry melt (0.18 ± 0.03 wt % H2O) and for a hydrous melt\ncontaining 3.36 ± 0.28 wt % H2O. Diffusion experiments were run\nfor 40 to 120 min and terminated by rapid quench. CO2 concentration\nprofiles were subsequently measured via attenuated total reflection\nFourier transform infrared spectroscopy (ATR-FTIR) and fitted with error\nfunctions to obtain individual diffusion coefficients. For the anhydrous and hydrous sample series, seven diffusion coefficients\nwere determined each. Diffusivity was found to increase exponentially with\ntemperature for both melts following an Arrhenius behaviour. The Arrhenius\nequation for the nominally dry leucititic melt is described by logDCO2=-1.44(±0.24)⋅10000T-1.95(±1.59), where DCO2 is the diffusion coefficient in m2 s−1 and T is the\ntemperature in K. In the experimental temperature range, H2O has an\naccelerating effect on CO2 diffusion. At 1200 ∘C,\ndiffusivity increases from 1.94 × 10−12 m2 s−1 in\nthe dry melt to 1.54 × 10−11 m2 s−1 in the hydrous\nmelt. The Arrhenius equation for the leucititic melt containing 3.36±0.28 wt % H2O is given by logDCO2=-1.09(±0.30)⋅10000T-3.41(±1.99). The activation energies for CO2 were determined to be 275 ± 47 kJ mol−1 for the anhydrous melt and 209 ± 58 kJ mol−1 for the\nhydrous melt. The high CO2 activation energy in the leucititic melt indicates that\nthe diffusion might be partly attributed to the carbonate species. At high\nmagmatic temperatures above 1200 ∘C, CO2 diffusivity in the\nleucititic melt is only slightly lower than CO2 diffusion in rhyolitic\nand basaltic melts, suggesting that CO2 diffusion in natural melts is\nrelatively independent from the bulk melt composition at such temperatures.\nCO2 diffuses slower than other volatile components such as halogens and\nH2O in depolymerized silicate melts. Thus, a fractionation of volatiles\ncan occur during magma ascent and degassing. The experimental data on\nCO2 diffusion can be used for modelling the degassing mechanisms of\nultrapotassic mafic melts.\n","PeriodicalId":11971,"journal":{"name":"European Journal of Mineralogy","volume":" ","pages":""},"PeriodicalIF":1.8000,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"European Journal of Mineralogy","FirstCategoryId":"89","ListUrlMain":"https://doi.org/10.5194/ejm-35-117-2023","RegionNum":3,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MINERALOGY","Score":null,"Total":0}
引用次数: 0
Abstract
Abstract. Using the diffusion couple technique, diffusion of
CO2 in a leucititic melt from the Colli Albani Volcanic District in
Italy was investigated at temperatures between 1200 and 1350 ∘C
in an internally heated pressure vessel at 300 MPa. To examine the effect of
dissolved H2O in the melt, experiments were performed for a nominally
dry melt (0.18 ± 0.03 wt % H2O) and for a hydrous melt
containing 3.36 ± 0.28 wt % H2O. Diffusion experiments were run
for 40 to 120 min and terminated by rapid quench. CO2 concentration
profiles were subsequently measured via attenuated total reflection
Fourier transform infrared spectroscopy (ATR-FTIR) and fitted with error
functions to obtain individual diffusion coefficients. For the anhydrous and hydrous sample series, seven diffusion coefficients
were determined each. Diffusivity was found to increase exponentially with
temperature for both melts following an Arrhenius behaviour. The Arrhenius
equation for the nominally dry leucititic melt is described by logDCO2=-1.44(±0.24)⋅10000T-1.95(±1.59), where DCO2 is the diffusion coefficient in m2 s−1 and T is the
temperature in K. In the experimental temperature range, H2O has an
accelerating effect on CO2 diffusion. At 1200 ∘C,
diffusivity increases from 1.94 × 10−12 m2 s−1 in
the dry melt to 1.54 × 10−11 m2 s−1 in the hydrous
melt. The Arrhenius equation for the leucititic melt containing 3.36±0.28 wt % H2O is given by logDCO2=-1.09(±0.30)⋅10000T-3.41(±1.99). The activation energies for CO2 were determined to be 275 ± 47 kJ mol−1 for the anhydrous melt and 209 ± 58 kJ mol−1 for the
hydrous melt. The high CO2 activation energy in the leucititic melt indicates that
the diffusion might be partly attributed to the carbonate species. At high
magmatic temperatures above 1200 ∘C, CO2 diffusivity in the
leucititic melt is only slightly lower than CO2 diffusion in rhyolitic
and basaltic melts, suggesting that CO2 diffusion in natural melts is
relatively independent from the bulk melt composition at such temperatures.
CO2 diffuses slower than other volatile components such as halogens and
H2O in depolymerized silicate melts. Thus, a fractionation of volatiles
can occur during magma ascent and degassing. The experimental data on
CO2 diffusion can be used for modelling the degassing mechanisms of
ultrapotassic mafic melts.
期刊介绍:
EJM was founded to reach a large audience on an international scale and also for achieving closer cooperation of European countries in the publication of scientific results. The founding societies have set themselves the task of publishing a journal of the highest standard open to all scientists performing mineralogical research in the widest sense of the term, all over the world. Contributions will therefore be published primarily in English.
EJM publishes original papers, review articles and letters dealing with the mineralogical sciences s.l., primarily mineralogy, petrology, geochemistry, crystallography and ore deposits, but also biomineralogy, environmental, applied and technical mineralogy. Nevertheless, papers in any related field, including cultural heritage, will be considered.