A medium frequency transformer design for spot welding machine using sizing equation and finite element analysis

IF 0.7 Q3 ENGINEERING, MULTIDISCIPLINARY

Engineering Review Pub Date : 2020-05-21 DOI:10.30765/er.40.3.05

S. Arslan, I. Tarimer, M. E. Güven, S. A. Oy

引用次数: 1

Abstract

In this study, a medium frequency power transformer has been designed analytically and its sizes have been obtained. The transformer’s analyses were made numerically by 2D AnsysMaxwell Solver software package. The Solver has also helped to study suitable transformer core and winding samples. Unlike medium frequency transformer, which is generally driven by unipolar PWM method, the designed transformer is driven by bipolar PWM method in the study. The core losses were obtained for different core materials (Trafoperm N3 and Amorfous 2605SA1) by AnsysMaxwell numerical and analytical calculations. The calculated losses for no-load working conditions were compared with each other. The designed transformer has been analyzed for its noload and loaded working conditions magnetically. Finally, the radial and axial forces created in the windings have also been examined for loaded working condition.

查看原文本刊更多论文

利用尺寸方程和有限元分析对点焊机中频变压器进行了设计

本文对一种中频电力变压器进行了解析设计，并得到了其尺寸。利用二维AnsysMaxwell求解软件包对变压器进行了数值分析。求解器还有助于研究合适的变压器铁芯和绕组样本。与中频变压器一般采用单极PWM方式驱动不同，本设计变压器采用双极PWM方式驱动。通过AnsysMaxwell数值和解析计算得到了不同芯材trafperm N3和Amorfous 2605SA1的芯损耗。对空载工况下的计算损耗进行了比较。对所设计变压器的空载工况和负载工况进行了磁力分析。最后，在负载工作条件下，在绕组中产生的径向和轴向力也进行了检查。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Engineering Review ENGINEERING, MULTIDISCIPLINARY-

CiteScore

1.00

自引率

0.00%

发文量

期刊介绍： Engineering Review is an international journal designed to foster the exchange of ideas and transfer of knowledge between scientists and engineers involved in various engineering sciences that deal with investigations related to design, materials, technology, maintenance and manufacturing processes. It is not limited to the specific details of science and engineering but is instead devoted to a very wide range of subfields in the engineering sciences. It provides an appropriate resort for publishing the papers covering prior applications – based on the research topics comprising the entire engineering spectrum. Topics of particular interest thus include: mechanical engineering, naval architecture and marine engineering, fundamental engineering sciences, electrical engineering, computer sciences and civil engineering. Manuscripts addressing other issues may also be considered if they relate to engineering oriented subjects. The contributions, which may be analytical, numerical or experimental, should be of significance to the progress of mentioned topics. Papers that are merely illustrations of established principles or procedures generally will not be accepted. Occasionally, the magazine is ready to publish high-quality-selected papers from the conference after being renovated, expanded and written in accordance with the rules of the magazine. The high standard of excellence for any of published papers will be ensured by peer-review procedure. The journal takes into consideration only original scientific papers.