Wear and friction behaviour of aluminium metal composite reinforced with graphite particles

IF 1 4区工程技术 Q4 ENGINEERING, MECHANICAL

International Journal of Surface Science and Engineering Pub Date : 2018-12-18 DOI:10.1504/IJSURFSE.2018.10017972

V. Sharma, R. Singh, R. Chaudhary

引用次数: 14

Abstract

Present paper discusses the effect of graphite powder on the wear and friction properties of aluminium melt. The aluminium graphite composite was fabricated using the stir casting technique. Three different amounts of graphite particle with 2 wt. %, 4 wt. % and 6 wt. % are used for the fabrication of the composite. Pin on disc experiments were performed as per ASTM-G99 between aluminium graphite (Al-Gr) composite and mild steel tribopair. Scanning electron microscope images for the worn Al-Gr composite were obtained to study the wear of the composite. It is observed that graphite particles help in reducing the wear and friction coefficient of the aluminium.

查看原文本刊更多论文

石墨颗粒增强铝-金属复合材料的磨损与摩擦性能

本文讨论了石墨粉对铝熔体磨损和摩擦性能的影响。采用搅拌铸造技术制备了铝-石墨复合材料。具有2重量%、4重量%和6重量%的三种不同量的石墨颗粒用于复合材料的制造。根据ASTM-G99在铝-石墨（Al-Gr）复合材料和软钢摩擦副之间进行销-盘实验。获得了磨损的Al-Gr复合材料的扫描电子显微镜图像，以研究该复合材料的磨损。据观察，石墨颗粒有助于降低铝的磨损和摩擦系数。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Surface Science and Engineering 工程技术-材料科学：膜

CiteScore

1.60

自引率

25.00%

发文量

审稿时长

>12 weeks

期刊介绍： IJSurfSE publishes refereed quality papers in the broad field of surface science and engineering including tribology, but with a special emphasis on the research and development in friction, wear, coatings and surface modification processes such as surface treatment, cladding, machining, polishing and grinding, across multiple scales from nanoscopic to macroscopic dimensions. High-integrity and high-performance surfaces of components have become a central research area in the professional community whose aim is to develop highly reliable ultra-precision devices.