Attenuation Measurement of Lossy Coatings of Carbon for Ka-Band Helix TWT Applications

Abstract

In a high efficiency traveling wave tube (TWT) amplifier, any reflections present in the device may cause oscillations and hence instability. A coating of lossy material on appropriate parts of the tubes (known as attenuators) is done to suppress these reflections. Carbon is a very commonly used material for this type of coating, and may be deposited by a number of techniques. In the present work, coatings of carbon were done on the dielectric substrate and evaluated for the attenuation performance at microwave frequencies. Three dielectric rods (APBN material) were coated with carbon by pyrolytic deposition method for different thickness. An experimental setup involving a rectangular wave-guide with a hole has been used for measuring the attenuation of the coated rods in the Ka-band frequency range. The same structure has been simulated using the Ansoft High Frequency Simulator (HFSS) and both the experimental and simulated results have been compared.