Mengganti Mikrokontroller Mesin Dust Collector pada PT. xxx dengan PLC OMRON CP1E-NA20CD-R

Q4 Engineering

Journal of Electrical and Electronics Engineering Pub Date : 2021-04-12 DOI:10.33021/JEEE.V3I2.1490

Surawan Setiyadi, Edo Aulia Billy Fany

引用次数: 0

Abstract

As a result of the production of powder processing causes a lot of dust around the production machine and factory. This of course can cause pollution. Dust needs to be collected using a Dust Collector (DC) machine. The controller on the DC machine at PT. xxx is often damaged in the control unit and requires repairs at a cost of around Rp. 5,000,000 per unit. In facts there are about 10 units of machines at PT.xxx that must work all. Because of DC machines are often damaged in their controllers, the maintenance department made a development to make replacement DC machine controllers. Namely using the Programmable Logic Controller (PLC). This PLC replaces the microcontroller unit on the DC machine, PLC uses ladder diagram programming language that is easily understood by some people working in the world of control. PLC parts that are easily found in the market and programming languages that are easy to understand and reliability make one of the reasons this PLC is used to replace the microcontroller unit.

查看原文本刊更多论文

将PT. xxx上的微控制器收割机替换为PLC OMRON cp1 - na20cd - r

由于生产过程中的粉末加工造成了大量的粉尘在生产机器和工厂周围。这当然会造成污染。需要使用直流除尘器(Dust Collector, DC)进行除尘。xxx工厂直流机器上的控制器经常在控制单元中损坏，需要维修，每台成本约为500万卢比。事实上，在PT.xxx大约有10台机器必须全部工作。由于直流电机的控制器经常损坏，维修部门对更换直流电机控制器进行了研究。即使用可编程逻辑控制器(PLC)。该PLC取代了直流电机上的单片机单元，PLC采用梯形图编程语言，易于一些从事控制领域工作的人理解。易于在市场上找到的PLC部件和易于理解和可靠性的编程语言使该PLC用于取代微控制器单元的原因之一。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Electrical and Electronics Engineering Engineering-Electrical and Electronic Engineering

CiteScore

0.90

自引率

0.00%

发文量

审稿时长

16 weeks

期刊介绍： Journal of Electrical and Electronics Engineering is a scientific interdisciplinary, application-oriented publication that offer to the researchers and to the PhD students the possibility to disseminate their novel and original scientific and research contributions in the field of electrical and electronics engineering. The articles are reviewed by professionals and the selection of the papers is based only on the quality of their content and following the next criteria: the papers presents the research results of the authors, the papers / the content of the papers have not been submitted or published elsewhere, the paper must be written in English, as well as the fact that the papers should include in the reference list papers already published in recent years in the Journal of Electrical and Electronics Engineering that present similar research results. The topics and instructions for authors of this journal can be found to the appropiate sections.