Compressive Properties of Poly (Dimethylsiloxane)–Hollow Glass Microballoons Syntactic Foams

IF 1.3 4区医学 Q4 MATERIALS SCIENCE, BIOMATERIALS

Cellular Polymers Pub Date : 2022-08-29 DOI:10.1177/02624893221123391

Alok K Upadhyay, A. Ullas

引用次数: 1

Abstract

Polymer syntactic foams are lightweight polymer composites that are prepared by introducing hollow microspheres in a resin. The main endeavour is to obtain a significant reduction in the weight of the composite along with energy absorption. The present investigation aims to prepare poly (dimethylsiloxane) (PDMS)-hollow glass microballoons (HGM) (40–60% v/v) syntactic foams. Not only did HGM reduce the density of the syntactic foams but also act as a reinforcing phase and increase the compressive properties of PDMS. A ∼25% reduction in density was obtained in syntactic foam when compared to the neat elastomer. Similarly, an improvement of ∼118% in compressive strength was attained at 40% loading of HGM in PDMS. Specific compressive strength and toughness values also registered improvements of the order of ∼191 and ∼240% respectively which highlight the potential of PDMS syntactic foams in varied applications. Graphical Abstract

查看原文本刊更多论文

聚二甲基硅氧烷-中空玻璃微球复合泡沫的压缩性能

聚合物合成泡沫是通过在树脂中引入空心微球制备的轻质聚合物复合材料。主要的努力是使复合材料的重量和能量吸收显著减少。本研究旨在制备聚二甲基硅氧烷(PDMS)-中空玻璃微球(HGM) (40-60% v/v)复合泡沫。HGM不仅可以降低复合泡沫的密度，还可以作为增强相，提高PDMS的抗压性能。与整齐弹性体相比，合成泡沫的密度降低了25%。同样，在PDMS中HGM加载40%时，抗压强度提高了~ 118%。比抗压强度和韧性值也分别提高了~ 191和~ 240%，这突出了PDMS复合泡沫在各种应用中的潜力。图形抽象

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Cellular Polymers 工程技术-材料科学：生物材料

CiteScore

3.10

自引率

0.00%

发文量

审稿时长

3 months

期刊介绍： Cellular Polymers is concerned primarily with the science of foamed materials, the technology and state of the art for processing and fabricating, the engineering techniques and principles of the machines used to produce them economically, and their applications in varied and wide ranging uses where they are making an increasingly valuable contribution. Potential problems for the industry are also covered, including fire performance of materials, CFC-replacement technology, recycling and environmental legislation. Reviews of technical and commercial advances in the manufacturing and application technologies are also included. Cellular Polymers covers these and other related topics and also pays particular attention to the ways in which the science and technology of cellular polymers is being developed throughout the world.