Performance Analysis of a Hybrid Thin Film Photovoltaic (PV) Vacuum Glazing

Abstract

In this study, we have investigated a hybrid thin film PV vacuum glazing called: ‘PV VG-4L’. The glazing involves an integration between a thin film PV glazing with a double vacuum glazing (both manufactured independently), and an additional layer of self-cleaning coated glass which totalling four layers of glass. The mathematical model of the PV VG-4L designs were developed and numerically solved in MATLAB. To evaluate the performance of the PV VG-4L, the prototype was manufactured and investigated at lab-scale and also under real conditions. Lab-scale experiments were conducted at steady state conditions using a TEC driven calibrated hot box at the Sustainable Energy Research Lab, University of Nottingham, UK. Meanwhile, outdoors, the prototype was tested at a research house at the University of Nottingham, UK. Under the influence of solar irradiance, the electrical performance of the PV-VG and the temperature difference between the surfaces of the glazing were analysed. However, the measurement of U-value under real conditions is not reliable due to the influence of solar irradiance on the heat flux sensor and also due to the absorbed solar irradiance by the thin film PV layer. Nevertheless, during low to zero solar irradiance, the U-value of the prototype can be estimated. The developed model was then validated against the experimental results by direct comparison to the trend of the experimental and theoretical curves obtained, and also by conducting error analysis using root mean squared percentage deviation (RMSPD) method. Testing using the calibrated hot box, adhering closely to ISO 12567 standards, resulted in an average measured total U-value of 0.6 W/m2K which is when compared to a single thin film PV glazing with a typical U-value of 5 W/m2K; the U-value is higher by almost 90%. From the analysis, the computed RMSPD value for the glazing surface temperature and the U-value are 4.02% and 0.92% respectively. Meanwhile, field testing under real conditions with a 0.4 m × 0.4 m PV VG-4L prototype found that 14 W/m2 power can be generated by the PV VG-4L at average solar irradiance of ~600 W/m2. RMSPD computed glazing surface temperatures, electrical power generated under real conditions and U-value are 2.90%, 8.70% and 2.89% respectively. The theoretical and experimental results are concluded to be in good agreement. This study has significant contributions to the knowledge of building integrated photovoltaic PV technology. The mathematical model that has been developed can be used for PV VG-4L design optimisation and also to simulate the performance of PV VG-4L under various conditions. At building efficiency level, the PV VG-4L not only can produce power, but it also has high insulating properties. The promising U-value implies its range of potential applications which can be improved depending on the energy needs and applications, such as for BIPV solar facade (PV curtain walling) in commercial buildings, greenhouses, skylight and conservatory.