{"title":"Optimization of the cellular morphology of biaxially stretched thin polyethylene foams produced by extrusion film blowing","authors":"Ouassim Hamdi, F. Mighri, D. Rodrigue","doi":"10.1177/0262489318797517","DOIUrl":null,"url":null,"abstract":"This work presents the production of cellular polymer films using extrusion blowing to impose biaxial stretching on the cellular structure while processing. The materials selected are linear low-density polyethylene (LLDPE) and low density polyethylene (LDPE) as the matrix, azodicarbonamide as the chemical blowing agent, and talc as the nucleating agent. The processing parameters, namely, the temperature profile, screw speed, feed rate, take-up ratio, blow-up ratio, and the matrix composition were all optimized to produce a homogeneous cellular structure with defined morphologies. The optimized films had a thickness below 300 µm, a relative density around 0.6, a cell density above 2 × 106 cells/cm3, and biaxially stretched cells with aspect ratios above 4 longitudinally and 3.8 transversally.","PeriodicalId":9816,"journal":{"name":"Cellular Polymers","volume":"37 1","pages":"153 - 168"},"PeriodicalIF":1.3000,"publicationDate":"2018-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1177/0262489318797517","citationCount":"17","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Cellular Polymers","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1177/0262489318797517","RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, BIOMATERIALS","Score":null,"Total":0}
引用次数: 17
Abstract
This work presents the production of cellular polymer films using extrusion blowing to impose biaxial stretching on the cellular structure while processing. The materials selected are linear low-density polyethylene (LLDPE) and low density polyethylene (LDPE) as the matrix, azodicarbonamide as the chemical blowing agent, and talc as the nucleating agent. The processing parameters, namely, the temperature profile, screw speed, feed rate, take-up ratio, blow-up ratio, and the matrix composition were all optimized to produce a homogeneous cellular structure with defined morphologies. The optimized films had a thickness below 300 µm, a relative density around 0.6, a cell density above 2 × 106 cells/cm3, and biaxially stretched cells with aspect ratios above 4 longitudinally and 3.8 transversally.
期刊介绍:
Cellular Polymers is concerned primarily with the science of foamed materials, the technology and state of the art for processing and fabricating, the engineering techniques and principles of the machines used to produce them economically, and their applications in varied and wide ranging uses where they are making an increasingly valuable contribution.
Potential problems for the industry are also covered, including fire performance of materials, CFC-replacement technology, recycling and environmental legislation. Reviews of technical and commercial advances in the manufacturing and application technologies are also included.
Cellular Polymers covers these and other related topics and also pays particular attention to the ways in which the science and technology of cellular polymers is being developed throughout the world.