Wear performance analysis of B4C and graphene particles reinforced Al–Cu alloy based composites using Taguchi method

IF 1.7 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY

Journal of the Mechanical Behavior of Materials Pub Date : 2023-01-01 DOI:10.1515/jmbm-2022-0274

T. S. Sachit, A. Bongale, Satish Kumar, Priya Jadhav

引用次数: 2

Abstract

Abstract In this study, the wear performance of boron carbide (B4C) and graphene (Gr) particles reinforced Al–Cu alloy composites was investigated. The composite samples were made using the solid-state manufacturing process. The wear performance was assessed using a pin-on-disc tribometer. The Taguchi optimization approach was used to determine the performance of each parameter. All experiments were carried out using the L27 array, which included three sets of parameters such as applied load, disc speed, and reinforcement percentage. The ANOVA approach was used to examine the impact of each parameter. According to the findings, the weight on the pin has the greatest influence on wear, followed by sliding speed and reinforcing percentage. The addition of B4C particles improves the wear resistance, and the Gr functions as a self-lubricating agent while in use. Scanning electron microscope analysis of worn-out samples revealed an abrasive type of wear process.

查看原文本刊更多论文

用田口法分析B4C和石墨烯颗粒增强Al–Cu合金基复合材料的磨损性能

摘要在本研究中，研究了碳化硼（B4C）和石墨烯（Gr）颗粒增强Al–Cu合金复合材料的磨损性能。复合材料样品采用固态制造工艺制成。使用销盘式摩擦计评估磨损性能。田口优化方法用于确定每个参数的性能。所有实验都是使用L27阵列进行的，该阵列包括三组参数，如施加的载荷、圆盘速度和加固百分比。方差分析方法用于检验每个参数的影响。根据研究结果，销上的重量对磨损的影响最大，其次是滑动速度和补强率。B4C颗粒的加入提高了耐磨性，Gr在使用中起到自润滑剂的作用。对磨损样品的扫描电子显微镜分析揭示了一种磨损过程。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of the Mechanical Behavior of Materials Materials Science-Materials Science (miscellaneous)

CiteScore

3.00

自引率

11.10%

发文量

审稿时长

30 weeks

期刊介绍： The journal focuses on the micromechanics and nanomechanics of materials, the relationship between structure and mechanical properties, material instabilities and fracture, as well as size effects and length/time scale transitions. Articles on cutting edge theory, simulations and experiments – used as tools for revealing novel material properties and designing new devices for structural, thermo-chemo-mechanical, and opto-electro-mechanical applications – are encouraged. Synthesis/processing and related traditional mechanics/materials science themes are not within the scope of JMBM. The Editorial Board also organizes topical issues on emerging areas by invitation. Topics Metals and Alloys Ceramics and Glasses Soils and Geomaterials Concrete and Cementitious Materials Polymers and Composites Wood and Paper Elastomers and Biomaterials Liquid Crystals and Suspensions Electromagnetic and Optoelectronic Materials High-energy Density Storage Materials Monument Restoration and Cultural Heritage Preservation Materials Nanomaterials Complex and Emerging Materials.