PARAMETRIC MANDIBLE RECONSTRUCTION PLATE

IF 0.5 4区工程技术 Q4 ENGINEERING, INDUSTRIAL

South African Journal of Industrial Engineering Pub Date : 2020-11-11 DOI:10.7166/31-3-2444

Brett Giddy, J. D. Merwe

引用次数: 0

Abstract

This study investigated the feasibility of a parametric mandible reconstruction plate in order to reduce surgical lead time, improve fit, and reduce residual stresses. The parametric plates were generated on the basis of simulated cephalometric measurements. A finite element analysis and a reconstruction plate/mandible fit test were performed on several combinations to determine whether the parametric plate provided a suitable alternative to conventional reconstruction plates in terms of fit and structural performance. The results indicated that the parametric plate is structurally superior to a conventional plate. The comparison test indicated that the parametric plate provides a reasonable approximation of mandible geometry.

查看原文本刊更多论文

参数化下颌骨重建钢板

本研究探讨了参数化下颌骨重建钢板的可行性，以减少手术前置时间，改善配合，并减少残余应力。参数板是在模拟头侧测量的基础上生成的。对几种组合进行了有限元分析和重建板/下颌骨配合试验，以确定参数化板是否在配合和结构性能方面提供了传统重建板的合适替代品。结果表明，参数化板在结构上优于常规板。对比试验表明，参数化钢板能较好地逼近下颌骨几何形状。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

South African Journal of Industrial Engineering 工程技术-工程：工业

CiteScore

1.10

自引率

20.00%

发文量

审稿时长

6 weeks

期刊介绍： The South African Journal of Industrial Engineering (SAJIE) publishes articles with the emphasis on research, development and application within the fields of Industrial Engineering and Engineering and Technology Management. In this way, it aims to contribute to the further development of these fields of study and to serve as a vehicle for the effective interchange of knowledge, ideas and experience between the research and training oriented institutions and the application oriented industry. Articles on practical applications, original research and meaningful new developments as well as state of the art surveys are encouraged.