Athirah Ayub, H. Bahruji, A. H. Mahadi
求助PDF
{"title":"Ni Nanoparticles on Reducible Metal Oxides (Sm2O3, CeO2, ZnO) as Catalysts for CO2 Methanation","authors":"Athirah Ayub, H. Bahruji, A. H. Mahadi","doi":"10.9767/BCREC.16.3.10948.641-650","DOIUrl":null,"url":null,"abstract":"The activity of reducible metal oxide Sm2O3, CeO2, and ZnO as Ni nanoparticles support was investigated for CO2 methanation reaction. CO2 methanation was carried out between 200 °C to 450 °C with the optimum catalytic activity was observed at 450 °C. The reducibility of the catalysts has been comparatively studied using H2-Temperature Reduction Temperature (TPR) method. The H2-TPR analysis also elucidated the formation of surface oxygen vacancies at temperature above 600 °C for 5Ni/Sm2O3 and 5Ni/CeO2. The Sm2O3 showed superior activity than CeO2 presumably due to the transition of the crystalline phases under reducing environment. However, the formation of NiZn alloy in 5Ni/ZnO reduced the ability of Ni to catalyze methanation reaction. A highly dispersed Ni on Sm2O3 created a large metal/support interfacial interaction to give 69% of CO2 conversion with 100% selectivity at 450 °C. The 5Ni/Sm2O3 exhibited superior catalytic performances with an apparent phase transition from cubic to a mixture of cubic and monoclinic phases over a long reaction, presumably responsible for the enhanced conversion after 10 h of reaction. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).","PeriodicalId":46276,"journal":{"name":"Bulletin of Chemical Reaction Engineering and Catalysis","volume":" ","pages":""},"PeriodicalIF":1.3000,"publicationDate":"2021-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bulletin of Chemical Reaction Engineering and Catalysis","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.9767/BCREC.16.3.10948.641-650","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 2
引用
批量引用
可还原金属氧化物(Sm2O3,CeO2,ZnO)上的Ni纳米粒子作为CO2甲烷化催化剂
研究了可还原金属氧化物Sm2O3、CeO2和ZnO作为Ni纳米颗粒载体对CO2甲烷化反应的活性。CO2甲烷化在200°C至450°C之间进行,在450°C时观察到最佳催化活性。用H2温度还原温度(TPR)法对催化剂的还原性进行了比较研究。H2-TPR分析还阐明了5Ni/Sm2O3和5Ni/CeO2在600°C以上温度下表面氧空位的形成。Sm2O3表现出比CeO2更高的活性,这可能是由于在还原环境下晶相的转变。然而,5Ni/ZnO中NiZn合金的形成降低了Ni催化甲烷化反应的能力。在Sm2O3上高度分散的Ni产生了大的金属/载体界面相互作用,在450°C下产生了69%的CO2转化率和100%的选择性。5Ni/Sm2O3在长时间的反应中表现出优异的催化性能,从立方相到立方相和单斜相的混合物具有明显的相变,这可能是反应10小时后转化率提高的原因。版权所有©2021作者所有,BCREC集团出版。这是CC BY-SA许可证下的开放访问文章(https://creativecommons.org/licenses/by-sa/4.0)。
本文章由计算机程序翻译,如有差异,请以英文原文为准。