Recent developments in the application of microwave energy in process metallurgy at KUST

IF 4.6 3区工程技术 Q1 METALLURGY & METALLURGICAL ENGINEERING

Mineral Processing and Extractive Metallurgy Review Pub Date : 2018-05-04 DOI:10.1080/08827508.2017.1401537

Ju Shao-hua, Pritam Singh, Peng Jinhui, A. Nikoloski, L. Chao, Guo Shenghui, R. P. Das, Zhang Libo

引用次数: 17

Abstract

ABSTRACT Kunming University of Science and Technology (KUST) has successfully developed, designed, fabricated and installed industrial microwave units for (i) removal of halides, (ii) activation of carbon, (iii) heating of dust laden air in electrostatic precipitators, (iv) drying of water based paints, and (v) heating of the HF pickling solution for cold rolled titanium alloy coils. This review article provides a summary of these process metallurgy applications. It is found that the use of microwave energy can increase the process efficiency, giving advantages, such as lower reaction temperature and shorter reaction time compared to traditional processes. 可显著降低反应温度、缩短时间，具有强化作用

查看原文本刊更多论文

KUST微波能在工艺冶金中应用的最新进展

摘要：昆明科技大学（KUST）成功开发、设计、制造和安装了工业微波装置，用于（i）去除卤化物，（ii）活化碳，（iii）在静电除尘器中加热含尘空气，（iv）干燥水基涂料，以及（v）加热冷轧钛合金卷材的HF酸洗溶液。这篇综述文章对这些工艺冶金应用进行了总结。研究发现，与传统工艺相比，微波能量的使用可以提高工艺效率，具有反应温度低、反应时间短等优点。可显著降低反应温度、缩短时间，具有强化作用

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Mineral Processing and Extractive Metallurgy Review 工程技术-矿业与矿物加工

CiteScore

10.30

自引率

18.00%

发文量

审稿时长

2.8 months

期刊介绍： Mineral Processing and Extractive Metallurgy Review publishes both theoretical and practical papers relevant to technical, economic, and environmental issues in the handling, processing, and utilization of minerals. In addition to regular issues, special issues focusing on subjects of regional and topical significance will be published when the Editor feels there is sufficient interest among readers.