Modeling of Surface Roughness and Tool Wear when Finishing Milling Process of the Circular Bevel Gear

Q2 Engineering

Journal of Machine Engineering Pub Date : 2023-03-07 DOI:10.36897/jme/161927

D. Pham, T. Hoang

引用次数: 0

Abstract

An experimental process to build the models of surface roughness and tool wear in the finish milling of the Gleason circular bevel gears was carried out in this study. The experiments were conducted according to a Box-Behnken matrix. Three cutting parameters were adjusted in each experiment including cutting speed, feed rate, and depth of cut. From the experimental results, the influences of cutting parameters on the surface roughness and tool wear were analysed in detail. Two models of surface roughness and tool wear were established with high accuracy. The optimal values of the cutting parameters were also determined to simultaneously ensure the minimum values of two output parameters. The further research directions were also suggested at the end of this study.

查看原文本刊更多论文

圆锥齿轮精铣加工时的表面粗糙度和刀具磨损建模

采用实验方法建立了Gleason圆锥齿轮精铣加工过程中表面粗糙度和刀具磨损的模型。实验依据Box-Behnken矩阵进行。在每个实验中调整三个切削参数，包括切削速度、进给速度和切削深度。从实验结果出发，详细分析了切削参数对表面粗糙度和刀具磨损的影响。建立了刀具表面粗糙度和刀具磨损两个高精度模型。确定切削参数的最优值，同时保证两个输出参数的最小值。最后提出了进一步的研究方向。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Machine Engineering Engineering-Industrial and Manufacturing Engineering

CiteScore

2.70

自引率

0.00%

发文量

审稿时长

25 weeks

期刊介绍： ournal of Machine Engineering is a scientific journal devoted to current issues of design and manufacturing - aided by innovative computer techniques and state-of-the-art computer systems - of products which meet the demands of the current global market. It favours solutions harmonizing with the up-to-date manufacturing strategies, the quality requirements and the needs of design, planning, scheduling and production process management. The Journal'' s subject matter also covers the design and operation of high efficient, precision, process machines. The Journal is a continuator of Machine Engineering Publisher for five years. The Journal appears quarterly, with a circulation of 100 copies, with each issue devoted entirely to a different topic. The papers are carefully selected and reviewed by distinguished world famous scientists and practitioners. The authors of the publications are eminent specialists from all over the world and Poland. Journal of Machine Engineering provides the best assistance to factories and universities. It enables factories to solve their difficult problems and manufacture good products at a low cost and fast rate. It enables educators to update their teaching and scientists to deepen their knowledge and pursue their research in the right direction.