Influence of micro boron carbide particles on microstructure, mechanical properties, and dry sliding wear strength of an aluminium Al2214-B4Cp metal matrix composite

Abstract

In this experimental research, an attempt is made to develop Al2214-B4Cp composite materials with reinforcement of micro boron carbide (B4Cp) (viz. 0, 1.5, 3, 4.5, and 6 wt.%) by using a novel liquid metallurgical stir casting technique with modified bottom pouring facilities and studying the microstructure, physical, mechanical, and dry sliding wear resistance responses. The microstructure of Al2214-B4Cp composite samples with varied boron carbide weight percentages was examined under an electronic scanning microscope (SEM) equipped with an energy dispersive X-ray spectrometer (EDX) device. The physical characteristics like density and porosity, mechanical strength, such as micro and macro hardness, yield and ultimate tensile strength, and sliding wear response were examined under variable experimental conditions. The experimental results of the Al2214-B4Cp composite revealed a decreased specific density with an increased weight percentage of boron carbide (B4Cp) particulate in the matrix and a homogeneous distribution of reinforced micro boron carbide (B4Cp) particles in the Al2214 matrix. There was an appreciable improvement in mechanical properties and wear strength in composite materials as compared to an unreinforced aluminium alloy.