Frequency and voltage dependence of electrical conductivity, complex electric modulus, and dielectric properties of Al/Alq3/p-Si structure

IF 1.4 Q3 PHYSICS, MULTIDISCIPLINARY
I. Orak, A. Karabulut
{"title":"Frequency and voltage dependence of electrical conductivity, complex electric modulus, and dielectric properties of Al/Alq3/p-Si structure","authors":"I. Orak, A. Karabulut","doi":"10.3906/fiz-1907-21","DOIUrl":null,"url":null,"abstract":": In order to enhance the capacitance of the Al/p-Si metal-semiconductor structure, the Alq 3 thin film was coated between these two layers using the spin coating technique as the interlayer. The electrical conductivity, real and imaginary parts of electric modulus, dielectric loss and dielectric constant parameters were examined at the room temperature by the help of admittance measurements in the 100 kHz to 1 MHz frequency range. The effect of frequency on the dielectric constant and dielectric loss values is negligible at the negative voltage values, up to about 0.8 V, and these values rapidly ascended after 0.8 V. The function of electrical modulus complex has been examined from the point of permittivity and impedance in order to clutch the contribution of the particle border on the relaxation mechanism of the materials. It is established that the examined dielectric parameters strongly correlated with the voltage and frequency. As a result, the changes in the dielectric parameters and electrical modulus due to the varying frequency were described as the results of relaxation process, polarization and surface conditions. Furthermore, it could be stated that the Alq 3 material used in the interfacial layer is a useful material which could be used in addition to the conventional materials.","PeriodicalId":46003,"journal":{"name":"Turkish Journal of Physics","volume":null,"pages":null},"PeriodicalIF":1.4000,"publicationDate":"2020-02-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3906/fiz-1907-21","citationCount":"5","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Turkish Journal of Physics","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3906/fiz-1907-21","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"PHYSICS, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 5

Abstract

: In order to enhance the capacitance of the Al/p-Si metal-semiconductor structure, the Alq 3 thin film was coated between these two layers using the spin coating technique as the interlayer. The electrical conductivity, real and imaginary parts of electric modulus, dielectric loss and dielectric constant parameters were examined at the room temperature by the help of admittance measurements in the 100 kHz to 1 MHz frequency range. The effect of frequency on the dielectric constant and dielectric loss values is negligible at the negative voltage values, up to about 0.8 V, and these values rapidly ascended after 0.8 V. The function of electrical modulus complex has been examined from the point of permittivity and impedance in order to clutch the contribution of the particle border on the relaxation mechanism of the materials. It is established that the examined dielectric parameters strongly correlated with the voltage and frequency. As a result, the changes in the dielectric parameters and electrical modulus due to the varying frequency were described as the results of relaxation process, polarization and surface conditions. Furthermore, it could be stated that the Alq 3 material used in the interfacial layer is a useful material which could be used in addition to the conventional materials.
Al/Alq3/p-Si结构电导率、复电模量和介电性能的频率和电压依赖性
为了提高Al/p-Si金属半导体结构的电容量,采用自旋镀膜技术在这两层之间涂覆alq3薄膜作为中间层。通过在100 kHz ~ 1 MHz频率范围内的导纳测量,在室温下测试了电导率、电模量的实部和虚部、介电损耗和介电常数等参数。频率对介电常数和介电损耗值的影响在负电压下可以忽略不计,在负电压下可达0.8 V左右,在负电压后这些值迅速上升。从介电常数和阻抗的角度考察了电模量复合物的函数,以便掌握粒子边界对材料弛豫机制的贡献。结果表明,所测的介电参数与电压和频率密切相关。因此,介质参数和电模量随频率变化的变化被描述为弛豫过程、极化和表面条件的结果。此外,可以声明,用于界面层的alq3材料是一种除常规材料外可使用的有用材料。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Turkish Journal of Physics
Turkish Journal of Physics PHYSICS, MULTIDISCIPLINARY-
CiteScore
3.50
自引率
0.00%
发文量
8
期刊介绍: The Turkish Journal of Physics is published electronically 6 times a year by the Scientific and Technological Research Council of Turkey (TÜBİTAK) and accepts English-language manuscripts in various fields of research in physics, astrophysics, and interdisciplinary topics related to physics. Contribution is open to researchers of all nationalities.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信