{"title":"Atomic fluorescence determination of mercury in fresh water ecosystems.","authors":"R Knox, W R Kammin, D Thomson","doi":"10.1155/S1463924695000113","DOIUrl":null,"url":null,"abstract":"<p><p>This paper reports on an investigation into determining nanogram/l quantities of mercury in marine and fresh water matrices using a cold vapour generation of mercury, followed by fluorescence detection. Samples were prepared for analysis using a free bromine oxidation technique. A high efficiency gas-liquid separator was used to enhance the detection of mercury. For fresh water, typical method detection limits (MDL) were determined at less than 1 nanogram/l (ng/l). For near shore seawater, the MDL was 1.2 ng/l. Method spikes, which were performed at 20 ng/l, showed mean recoveries within US EPA Contract Laboratory Protocol (CLP) acceptance criteria. System blanks averaged 0.12 ng/l, and recoveries of NIST 1641c diluted to 29.4 ng/l averaged 93.4%. A number of local rivers and streams were sampled, and mercury was determined. All results to date indicate mercury levels below the US EPA chronic water quality criteria for mercury.</p>","PeriodicalId":22600,"journal":{"name":"The Journal of Automatic Chemistry","volume":"17 2","pages":"65-71"},"PeriodicalIF":0.0000,"publicationDate":"1995-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1155/S1463924695000113","citationCount":"5","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"The Journal of Automatic Chemistry","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1155/S1463924695000113","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 5
Abstract
This paper reports on an investigation into determining nanogram/l quantities of mercury in marine and fresh water matrices using a cold vapour generation of mercury, followed by fluorescence detection. Samples were prepared for analysis using a free bromine oxidation technique. A high efficiency gas-liquid separator was used to enhance the detection of mercury. For fresh water, typical method detection limits (MDL) were determined at less than 1 nanogram/l (ng/l). For near shore seawater, the MDL was 1.2 ng/l. Method spikes, which were performed at 20 ng/l, showed mean recoveries within US EPA Contract Laboratory Protocol (CLP) acceptance criteria. System blanks averaged 0.12 ng/l, and recoveries of NIST 1641c diluted to 29.4 ng/l averaged 93.4%. A number of local rivers and streams were sampled, and mercury was determined. All results to date indicate mercury levels below the US EPA chronic water quality criteria for mercury.