Ag Precursor-Assisted 350 °C Growth of Cu(In,Ga)Se2 Solar Cells Based on a Three-Stage Process

IF 5.5 3区 材料科学 Q2 CHEMISTRY, PHYSICAL
ACS Applied Energy Materials Pub Date : 2026-10-26 Epub Date: 2026-10-07 DOI:10.1021/acsaem.6c02498
Yosuke Abe, Takahito Nishimura
{"title":"Ag Precursor-Assisted 350 °C Growth of Cu(In,Ga)Se2 Solar Cells Based on a Three-Stage Process","authors":"Yosuke Abe,&nbsp;Takahito Nishimura","doi":"10.1021/acsaem.6c02498","DOIUrl":null,"url":null,"abstract":"<p>Lowering the growth temperature of Cu(In,Ga)Se<sub>2</sub> (CIGS) is required for bifacial structures based on CIGS deposition on transparent conductive oxides and for CIGS tandem solar cells, but low-temperature growth generally deteriorates CIGS absorber quality and solar-cell performance. To address this issue, we introduce Ag as a precursor layer for low-temperature CIGS growth. We first vary the Ag precursor thickness to identify the optimum Ag incorporation level. Although Ag improves CIGS absorber quality, it also reduces the net acceptor density; excessive Ag incorporation therefore leads to performance loss. To balance these competing effects, we select a 10-nm Ag precursor thickness, which improves film quality while limiting the reduction in net acceptor density, and apply this condition to low-temperature growth. Under this optimized condition, Ag incorporation improves the quality of low-temperature-grown CIGS absorbers, as evidenced by the minority-carrier lifetime, diode parameters, and Urbach energy, consistent with its behavior under the reference high-temperature condition of 600 °C. As a result, (Ag,Cu)(In,Ga)Se<sub>2</sub> solar cells fabricated at 350 °C maintain a power conversion efficiency of approximately 15%, whereas CIGS devices without Ag show severe performance degradation. These results demonstrate that Ag precursor engineering is effective for low-temperature CIGS growth toward bifacial and tandem solar-cell applications.</p>","PeriodicalId":4,"journal":{"name":"ACS Applied Energy Materials","volume":"9 20","pages":"13645–13654"},"PeriodicalIF":5.5000,"publicationDate":"2026-10-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Applied Energy Materials","FirstCategoryId":"88","ListUrlMain":"https://pubs.acs.org/doi/10.1021/acsaem.6c02498","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2026/10/7 0:00:00","PubModel":"Epub","JCR":"Q2","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
引用次数: 0

Abstract

Lowering the growth temperature of Cu(In,Ga)Se2 (CIGS) is required for bifacial structures based on CIGS deposition on transparent conductive oxides and for CIGS tandem solar cells, but low-temperature growth generally deteriorates CIGS absorber quality and solar-cell performance. To address this issue, we introduce Ag as a precursor layer for low-temperature CIGS growth. We first vary the Ag precursor thickness to identify the optimum Ag incorporation level. Although Ag improves CIGS absorber quality, it also reduces the net acceptor density; excessive Ag incorporation therefore leads to performance loss. To balance these competing effects, we select a 10-nm Ag precursor thickness, which improves film quality while limiting the reduction in net acceptor density, and apply this condition to low-temperature growth. Under this optimized condition, Ag incorporation improves the quality of low-temperature-grown CIGS absorbers, as evidenced by the minority-carrier lifetime, diode parameters, and Urbach energy, consistent with its behavior under the reference high-temperature condition of 600 °C. As a result, (Ag,Cu)(In,Ga)Se2 solar cells fabricated at 350 °C maintain a power conversion efficiency of approximately 15%, whereas CIGS devices without Ag show severe performance degradation. These results demonstrate that Ag precursor engineering is effective for low-temperature CIGS growth toward bifacial and tandem solar-cell applications.

Abstract Image

基于三阶段工艺的Ag前驱体辅助350°C生长Cu(In,Ga)Se2太阳能电池
在透明导电氧化物上沉积基于CIGS的双面结构和CIGS串联太阳能电池中,需要降低Cu(In,Ga)Se2 (CIGS)的生长温度,但低温生长通常会降低CIGS吸收剂的质量和太阳能电池的性能。为了解决这个问题,我们引入Ag作为低温CIGS生长的前驱体层。我们首先改变银前驱体厚度,以确定最佳银掺入水平。Ag虽然提高了CIGS吸收体的质量,但也降低了净受体密度;因此,过量的银掺入会导致性能损失。为了平衡这些相互竞争的影响,我们选择了10纳米的银前驱体厚度,这可以提高薄膜质量,同时限制净受体密度的降低,并将此条件应用于低温生长。在此优化条件下,Ag的掺入提高了低温生长CIGS吸光体的质量,其少数载流子寿命、二极管参数和乌尔巴赫能量都证明了这一点,与600°C参考高温条件下的行为一致。因此,在350°C下制备的(Ag,Cu)(In,Ga)Se2太阳能电池保持了大约15%的功率转换效率,而没有Ag的CIGS器件表现出严重的性能下降。这些结果表明,银前驱体工程是有效的低温CIGS生长到双面和串联太阳能电池应用。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
ACS Applied Energy Materials
ACS Applied Energy Materials Materials Science-Materials Chemistry
CiteScore
10.30
自引率
6.20%
发文量
1368
期刊介绍: ACS Applied Energy Materials is an interdisciplinary journal publishing original research covering all aspects of materials, engineering, chemistry, physics and biology relevant to energy conversion and storage. The journal is devoted to reports of new and original experimental and theoretical research of an applied nature that integrate knowledge in the areas of materials, engineering, physics, bioscience, and chemistry into important energy applications.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书