Adsorption-desorption of lead by polycarboxylate-coated bentonite

Abstract

Abstract To develop more economical and efficient heavy metal adsorbents, natural bentonite was employed as a raw material, and triethoxyvinylsilane served as a grafting agent to achieve the grafting bonding of sodium polyacrylate and bentonite. Structural alterations in the modified bentonite were analyzed through thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The adsorption and desorption characteristics of SAPAS-Bentonite and raw bentonite were compared and tested under various conditions, including time, temperature, pH, and lead ion concentration. The adsorption and desorption properties of sodium polyacrylate-grafted bentonite (SAPAS-Bentonite) were compared under various conditions (time, temperature, pH, and lead ion concentration). The results revealed that the modified method successfully achieved nano-scale coating of bentonite particles with sodium polyacrylate, leading to an increase in the maximum adsorption capacity of lead ions by 47.5%, reaching 165.73 mg g. A greater adsorption affinity for lead ions was exhibited by the outer sodium polycarboxylate portion of SAPAS-Bentonite compared with the inner bentonite. The adsorption of internal bentonite was limited by blocking when the adsorption of sodium polyacrylate did not reach the upper limit. The adsorption isotherm shifted from the Langmuir monolayer characteristic of the original bentonite to the S-shaped isotherm, reflecting the sodium polycarboxylate properties of SAPAS-Bentonite. Both bentonites demonstrated strong retention capacity for lead, with SAPAS-Bentonite surpassing raw bentonite in performance. This study provides valuable insights into the potential of SAPAS-Bentonite in the treatment of heavy metal pollution.