Continuous Technological Processes during Processing of SNF for a Closed Nuclear-Fuel Cycle

IF 0.6 4区工程技术 Q4 ENGINEERING, CHEMICAL

Theoretical Foundations of Chemical Engineering Pub Date : 2025-06-27 DOI:10.1134/S0040579525700319

Yu. S. Mochalov, A. A. Zherebtsov, A. E. Usmanov, A. N. Rybakov, K. N. Dvoeglazov

引用次数: 0

Abstract

The necessity of developing new continuous-action devices under conditions of limited overall dimensions for nuclear safety is substantiated. Based on the completed cyclograms of the periodically operating apparatuses, a graph of the stages of SNF processing is constructed with the selection of the limiting stages without duplicating the devices. The draft designs of continuous-action apparatuses of the main technological conversions in the technology of a closed nuclear-fuel cycle have been developed.

Abstract Image

查看原文本刊更多论文

闭式核燃料循环SNF处理过程中的连续工艺过程

为保证核安全，必须在有限的总体尺寸条件下研制新型连续动作装置。基于周期运行设备的完整环图，在不重复设备的情况下，选择极限阶段，构造了SNF处理阶段图。封闭型核燃料循环技术中主要技术转换的连续动作装置的设计草案已经拟订。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Theoretical Foundations of Chemical Engineering 工程技术-工程：化工

CiteScore

1.20

自引率

25.00%

发文量

审稿时长

24 months

期刊介绍： Theoretical Foundations of Chemical Engineering is a comprehensive journal covering all aspects of theoretical and applied research in chemical engineering, including transport phenomena; surface phenomena; processes of mixture separation; theory and methods of chemical reactor design; combined processes and multifunctional reactors; hydromechanic, thermal, diffusion, and chemical processes and apparatus, membrane processes and reactors; biotechnology; dispersed systems; nanotechnologies; process intensification; information modeling and analysis; energy- and resource-saving processes; environmentally clean processes and technologies.